Dissertation > Excellent graduate degree dissertation topics show

The Vibration Analysis and Improvement Design of Beam in Computerized Embroidery Machine

Author: FuCheng
Tutor: GeXiaoYao；LinJianLong
School: Beijing Technology and Business University
Course: Mechanical Design and Theory
Keywords: Computerized Embroidery Machine Vibration Modal Analysis Finite Element Analysis Dynamic Vibration Absorber
CLC: TS941.56
Type: Master's thesis
Year: 2005
Downloads: 100
Quote: 1
Read: Download Dissertation

Abstract


The computerized embroidery machine is developed on the base of the computerized sartorius, which connects the traditional brede with the electric and mechanical technology,and presents some characteristics such as simple structure, steady performance, various functions,advanced automatism, easy operation and low voice. So it’s used widely in the accessorial field of Clothes Industry——Embroidery Industry . Embroidery machines made in our country mostly are imitated from the type of other countries, and the technique level of making the accessory is also lower in our country, so the maximum working rev of the homemade computerized embroidery machine is limited. For example, the homemade 20-headed computerized embroidery machine can hardly get the speed of 900rpm. When the principal axis turns over 750rpm, the embroidery machine will vibrate severely, and the thread-broken rate will rise rapidly.The research takes the GY920A 20-headed computerized embroidery machine as a subject, which will improve the performance of the machine by means of theoretic calculation, vibration analysis and finite element analysis.In the part of the vibration experiments and analysis, firstly, used the simple-beam theory to estimate the natural frequency of the beam of the 20-headed computerized embroidery machine.secondly, measured the beam of its low rank natural frequency, the beam’s horizontal vibrating acceleration amplitude, speed amplitude and the displacement amplitude in different rev and different turn parts. Found that it is sympathetic vibration, which bring on the thread-broken rate rise rapidly. On this base, established the finite element analysis modle of the vibrating beam, and took on hamonic analysis and modal analysis with the mold. The rusult of test and analysis offer the basis for farther improvement of the computerized embroidery machine.In the design and improvement section, took the three methods as follow: changed the section form of the beam, amended the fixing method of both side of the beam and design the dynamic vibration absorber according to the vibration theory to raise the working speed of the computerized embroidery machine. The most inportant part of this section is the design of dynamic vibration absorber. Firstly, decided the parameters of dynamic vibration absorber according to the vibration theory, then calculated the amplitude of the beam which installed the dynamic vibration absorber according to the theory of elastic mechanics and simulated the effect of the dynamic vibration absorber by finite element analysis to make sure that the dynamic vibration absorber is effection.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  3. EDM Electrode Wear Mechanism and Control Research,TG661
  4. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  5. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  6. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  7. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  8. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  9. Design of Testing Equipment for Electronic Products,TN06
  10. Research on Structural Vibration of Steam Piping System,TK284.1
  11. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  12. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  13. Study on Reducing the Mower Vibration by Optimizing the Crank-rod Mechanism of 170F Engine,S817.111
  14. Research on Distributed Fiber Optic Vibration Sensor,TP212.14
  15. Welding Research and Application of sump pumps based on the finite element analysis software,TG457.2
  16. Finite Element Analysis of the Effects of Traction on the Biomechanical Behavior of the Degenerated Cervical Spine,R681.55
  17. Timber Difference Study on the Style of Folk Singing and Popular Singing,J616
  18. The Effect of Different Muscle Strength on the Transmission of Impact Vibration in Human Body,G804.2
  19. Negative pressure pulse jet generator design study,P634.3
  20. The Analysis of Vibration Frequency of Film Bulk Acoustic Resonators,TB533
  21. Numerical Modeling on the Temperature Field and Heat Stress Field in the Process of Foundry Freezing,O343.6

CLC: > Industrial Technology > Light industry,handicrafts > Garment industry,footwear industry > Garment industry > Processing machinery and equipment > All kinds of machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile