Dissertation > Excellent graduate degree dissertation topics show

Design of Micro LED Display Device and Fabrication of Isolation Grooves

Author: JinXia
Tutor: LiangJingQiu
School: Graduate Schoo,Chinese Academy of Sciences
Course: Optics
Keywords: microdisplay device LED-array isolation grooves wet etching AlGaInP
CLC: TN141
Type: Master's thesis
Year: 2006
Downloads: 142
Quote: 2
Read: Download Dissertation

Abstract


We live in a world with abundant and colorful information. With the characteristic of ample, exact, timely and credible, visual is the main measure to get information all along. Display technique is one of the most important techniques to transform the vast information to visual. With the rapid development of electronic production and portable mobile communication, we need superior display device with higher information content.The investigation of micro-display technique is rising in this situation. It brings us the vivid and precise display device which is real-time, energy saving and portable.As an entirely solid active light emitting device, semiconductor micro-display device is excellent, for example, low voltage, high efficiency, rapid response speed, firm performance and wide range of working temperature. The isolation grooves between LED pixels are of central importance in LED-array technique, which is the basic of fabrication of micro LED display device.There are four parts of the thesis.Firstly, introduce the micro-display device, and emphasize the development and application of micro LED display.Secondly, design the main parameter of AlGaInP-LED display device including the size and resolution. Analyze the light emitting characteristic of AlGaInP material. Calculate the distribution of injected current and design the width and depth of isolation grooves.Thirdly, study on the structure and anisotropic etching principle of p-GaP,

Related Dissertations

  1. Study on Visible Light Communication System Based on White LED Array Source,TN929.1
  2. Study of Substrate Transfer and Reliability of AlGaInP LED,TN312.8
  3. Thermal Simulation and Key Technologies of Chemical Mechanical Planarization (CMP) for Phase Change Memory,TP333
  4. Study on High Power 980nm Vertical Cavity Surface Emitting Lasers,TN248
  5. Preparation and characterization of black silicon material,TN304.12
  6. Study of Laser Assisted Wet Chemical Etching,TN249
  7. Study on Key Technologies of A Novel Micromachined Gyroscope Based on Shear Stress Detection,V241.5
  8. Study on the Wet Anisotropic Etching Characteristics of (100)、(110) Silicon,TG174
  9. Glass microfabrication technology research and MHD micropump prototype development,TQ171
  10. Study and Analysis on 980mm High Power Vertical Cavity Surface Emitting Lasers,TN248
  11. Generating Multi-spectral Images and Separating Frequency Components Based on Diffractive Optics Effects,TP391.41
  12. Electro-optical phase shifter array using ferroelectric thin films,TN623
  13. Fabricating and Transferring of GaAs Microtips,TH742
  14. Study on Technique of Wet Etching for 3D Structure of MEMS on the Silicon Substrate,TG171
  15. Characteristic Analysis and Structure Design of MMI-Coupled Ring Resonator Applied in Photonic Integrated Circuits,TN256
  16. 3kA/4.5kV high-power GTO key technology research,TM564
  17. The Formation of Microchannel Array by Electrochemical Etching,TN305
  18. Study on the Fabrication of Micro-needles Arrays for Transdermal Drug Delivery,TH703
  19. Comparative Studies on Dry and Wet Etching in Fabricating Ridge Semiconductor Laser,TN248.4
  20. Study on Texture Mechanism and the Surface Texture Uniformity of AZO Film,O484.1

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Vacuum Electronics > Electron beam devices,X-ray tube, cathode ray tubes > Display
© 2012 www.DissertationTopic.Net  Mobile