Dissertation > Excellent graduate degree dissertation topics show

Study on the Characteristics and Appraise the Oil Displacement Effect of Two Kinds of Polymer Surfactant

Author: QuChengYong
Tutor: LiYiQiang
School: Daqing Petroleum Institute
Course: Oil and Gas Field Development Project
Keywords: Poly table agent Viscosity Flow properties Flooding effects Stranded
CLC: TE357.4
Type: Master's thesis
Year: 2010
Downloads: 88
Quote: 1
Read: Download Dissertation

Abstract


With the exploitation of oil fields, oil wells water content increases, the decline has become one of the very common problem, and the the Daqing Oilfield vast majority block has entered the high water cut, especially in the second, three types of reservoir, formation waterflood residual oil reserves still very rich, and therefore carry the waterflood enhanced oil recovery technology to ensure significant oil and gas production. Poly table agent both the high viscosity characteristics of the polymer and the surface active agent is the dual characteristics of the surface-active, and thus having a good emulsifying and dispersing ability, strong tackifier, flocculation, in oilfield applications in recent years been more fast development, has become an important technical measures to enhance oil recovery after polymer flooding, is one of the effective ways to solve the high water content, low production in Daqing Oil Production Plant, Wuchang, eight plants, plant have more successful field test reported. For blocks with poor reservoir properties, the structure of poly table agent also needs to be improved to make it more perfect performance, Fuyang reservoir of low permeability sandstone geological features from static and dynamic comparative evaluation refining, Haibo kinds of poly the table agent physical and chemical properties of the pros and cons, good or bad flooding effects and dynamic stranded differences, so that preferred a more reasonable way of contribution, specific research contents are as follows: 1 static aspects of research and analysis of three different concentrations (800 mg / L, 1000mg / L, 1500mg / L) refining, Haibo poly the table agent solution viscosity characteristics (viscosity stability, salt shear resistance), viscoelastic properties and emulsifying properties compared with ordinary carve polymer, the results show that : In addition to poor salt tolerance (but still stronger than the polymer), the Haibo poly table agent performance are superior refining poly table agent, polymer worst. 2 dynamic aspects of the first through the resistance coefficient and residual resistance factor evaluation of the performance of two different concentrations of poly table agent solution flow in porous media; Second, the combination of poly table agent solution physicochemical current performance analysis studies investigated the concentration and slug its drive effect of the oil, and ultimately determine the concentration of 1000mg / L Haibo poly table agent solution flooding is the most cost-effective, appropriate size of the slug 0.7PV oil recovery increased up to 17% -19% ; Finally, in the process of injecting different solution concentrations and different slug size polylactic table agent flooding, contrast difference of two poly table agent in the formation of dynamic retention.

Related Dissertations

  1. Synthesis and Properties of Novel Low Viscosity Difluorooxymethylene-Bridged Liquid Crystals Compounds,O753.2
  2. The Rheological and Adhesion Properties of EVA-based Hot Melt Adhesives,TQ436.4
  3. Synthesis of NVF-DADMAC Copolymer and Its Application in Papermaking,TS727
  4. Study on the Thermal Conductivity and Radiation Characteristics of Nanofluids,TB383.1
  5. Study on Thermal Parameters of Nanofluid in the Application of Heat Pipe,TB383.1
  6. Research of Chemistry-microbial Compound Viscosity Reduction in Heavy Oil Gathering and Transportation,TE39
  7. Study on Evaluation of Surface-active Polymer,TE357.4
  8. Feasibility Study on Major Reservoirs at Sazhong Area by Surfactant/Polymer Flooding After Polymer Flooding,TE357.4
  9. Study on the Quality Analytical Model for Lubricating Oil of Diesel Engine,TK428.9
  10. Study of Mechanism on the Viscosity Reduction of Oilfield Polymer Sewage by the Radiation of Microwave,X703
  11. Preparation of Bromobutyl Rubber and Characterization of Its Structure and Property,TQ333.6
  12. Study on the Preparation and Heat Transfer Enhancement Performance of Magnetic Nanofluids,TB383.1
  13. Synthesis and Evaluation of the Oil Soluable Viscosity Reducer ESA for Heavy Oil,TE869
  14. Laboratory Investigation of Polymer-Surfactant Dual-Compound System and Its Influence on Stability of Crude Oil Emulsions,TE39
  15. Study on Reinforcment of Pulp Delignification Rate in Oxygen Bleaching Process,TS745
  16. Rheological Properties and Thermal Denaturation after Enzymatic Modification of Whey Protein by TGase,TS252.1
  17. Synthesis and Performance of Hydrophobically Modified Polyacrylamide with Surface Activity,TE39
  18. Study on Modification and Property of Soy-based Protein Adhesives,TQ432
  19. Synthesis and Evaluation of the Viscosity Reducer for TK1073 Oil in Tahe Oil Field,TE868
  20. Technical Study on ChenNan Heavy Oil Dehydration Process by Thermochemistry,TE39
  21. Studies on the Preparation and Properties of Carboxymethyl Starch and Its Amide Derivatives,TS231

CLC: > Industrial Technology > Oil and gas industry > Oil and gas development and mining > Production Engineering > Enhanced oil recovery and maintain reservoir pressure (secondary and tertiary oil recovery ) > Thermal, miscible , Chemical Oil Recovery (EOR EOR )
© 2012 www.DissertationTopic.Net  Mobile