Dissertation > Excellent graduate degree dissertation topics show

Preparation of a polypropylene car Bumper

Author: LiHongFeng
Tutor: AoYuHui
School: Changchun University of
Course: Organic Chemistry
Keywords: polypropylene (PP) ethylene-propylene-diene (EPDM) Dynamic vulcanization modification talcum
CLC: TQ325.14
Type: Master's thesis
Year: 2010
Downloads: 132
Quote: 0
Read: Download Dissertation

Abstract


Polypropylene (PP) is widely used for abundant material, good mechanical performance, chemistry-resisting, and low price. Polypropylene have been widely applied in fields of Packing, agriculture, building, automobile, electrical equipment, et al. But the disadvantages of low rigidity, low strength and low toughness seriously limit their further applications in fields of high-performance structural materials. So Polypropylene should be strengthened and toughness. At Present, chemical modification techniques of copolymerizing, grafting, and physical modification including elastomer blending, rigid organize filler filling.In this paper, PP as fundamental resin was toughed by elastomer of ethylene-propylene-diene(EPDM) as primary toughness agent, With maleic anhydride grafted polypropylene(PP-g-MAH) to improve polarity of the compound, and talcum(talc) as filler for the Special Compound of Car bumper by extrusion technology on twin-screw extruder. And the content of the EPDM、Dicumyl peroxide (DCP)、talc influence the mechanical performance of the Special Compound of Car bumper. The results of the test of impact strength, tensile strength, melt flow rate (MFR) and the analysis of SEM to describe microcosmic structure.The mechanical properties, flow ability and morphological structure of blends based on the content of DCP was studied, the results showed that the MFR of the blends was increased with the increment of DCP. The Impact strength of the blends was decreased with the increment of DCP and the yield stress of the blends was decreased. The SEM showed that the EPDM particle was smaller particle size and a more homogeneous distribution in the matrix.The mechanical properties, flow ability and morphological structure of blends based on the content of talcum was studied, the results showed that the MFR of the blends was decreased with the increment of talcum. The Impact strength of the blends was decreased with the increment of talcum and the yield stress of the blends was first increased and then decreased. The SEM showed that talcum and the EPDM particle was smaller particle size and a more homogeneous distribution in the matrix.The optimum processing parameter and formulation for the Special Compound of Car bumper were determined. Blends could be improved by using simple composite crafts and cheap reinforcements. The compound had a good process ability, higher impact resistance and spray-paint easily, being a new impact resistant PP with excellent overall property. It could substitute similar imported product.

Related Dissertations

  1. Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
  2. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  3. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  4. Synthesis and Performance Study of Bisphenol AP-based Polybenzoxazines,TQ320.1
  5. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  6. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  7. Research on the Interface Modification of Epoxy Resin/Metallic Substrates and Epoxy Resin/Pigment,TQ630.1
  8. Research and Implementation of the authenticity of the digital audio detection method,TN912.3
  9. Synthesis of Silver Nanoparticles on Modified Multi-walled Carbon Nanotubes and Their Antimicrobial Effects,TB383.1
  10. Modification of Ceramic Membrane and Its Use in MD,TQ028.8
  11. Study on Enzymatic Hydrolysis and Characteristics of Membrane Separation of Wheat Gluten,TS210.1
  12. Study on Hydrophilic Modification and Formation Mechanism of PVDF/MMT Membranes for Oil/Water Separations,TQ028.8
  13. Micro - Preparation and Characterization of Nanometer SiC / polypropylene composites,TQ325.14
  14. Cycloid Teeth Profile Research and Experiment Design about New FA Transmission,TH132.41
  15. Modify shall not exceed the scope of the invention patent applications \,D923.42
  16. Study on Preparation of POE、Engage and EPM Modified LDPE Foaming Materials and Physical and Mechanical Properties,TB383.4
  17. Study on Starch Based Green Absorption Material,TB34
  18. Research on Modal Parameters Identification and Application of Bridge Structure,U446
  19. Research on EPON Technology and Engineering and Application,TN929.1
  20. Studies on Itraconazole-Loaded Liposomes Coated by Carboxymethyl Chitosan,R943

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polymer resin and plastic > Polyolefin plastic > Polypropylene
© 2012 www.DissertationTopic.Net  Mobile