Dissertation > Excellent graduate degree dissertation topics show

Research on the Offsetting for Triangular Meshes and Curves on Them

Author: LiangFengJuan
Tutor: ChenZhengMing
School: Hohai University
Course: Computer Software and Theory
Keywords: compound curve/surface triangular mesh offsetting self-intersection
CLC: TP391.7
Type: Master's thesis
Year: 2007
Downloads: 105
Quote: 0
Read: Download Dissertation

Abstract


Offset is an important operation in CAD/CAM, and had been widely used in various applications, such as numerical control machining, solid modeling, robotics etc. Lots of effective offsetting methods for single curve/surface have been proposed, but the study for compound curve/surface offsetting has just begun. For the triangular mesh is widely used in industry and computer graphics systems, this thesis focuses on the offset methods for triangular meshes and curves on them.Round offset for curves on triangular mesh has more applications than sharp offset, but there is no effective round offset method now. This thesis proposes a new round offset method. Firstly, compute offsetting trochoids for all ends of original curves, divide the original curves into more new line segments according to the offsetting trochoids so that every offsetting curve for new line segments is in a triangular face; Then, connect the gaps generated during offsetting using approximate arc segments, delete local invalid loops utilizing interference continuity; Finally, extend the sweep line method of polygonal chains intersection, delete global invalid loops by finding global intersections.The present offset methods for triangular mesh either use sharp offset to avoid gaps and local interferences or make use of feathers of 3-axis machining to delete interference in 2D CL-surface. A new offset method for triangular mesh is present in this thesis, using multiple normal vectors of a vertex to deal with gaps and continuity to delete local invalid areas. The characteristic of this method are using properties of vertexes and edges to connect gaps roundly and utilizing interference continuity to improve the efficiency of deleting local invalid areas.This thesis realized the new methods in the environment of VC++ 6.0 and ACIS. Experiments show that the proposed methods are effective; especially that deleting for local invalid areas is efficiently.

Related Dissertations

  1. Research and Implementation of Intersection Method for Triangular Mesh Models,TP391.41
  2. Intersection of Mesh Surfaces and Construction Offset Line on Surfaces,TP391.72
  3. Research on Data Segmentation Technology in Reverse Engineering,TP391.7
  4. Study and Implementation on Triangulation Algorithm of Image,TP391.41
  5. Generating Method and Software Development for Multi-point Forming Surface Based on Triangular Mesh,TG30
  6. Geometry Processing Method Based on Hexagonal Mesh,TP391.41
  7. Vector Identities in Discrete Exterior Calculus,O172.1
  8. Research on the Application of Neural Network to Surface Reconstruction in Reverse Engineering,TB47
  9. The Automatic Generation Rescerch of Tool Paths for Surfaces Machinning Based on Space-Filling Curves,TG659
  10. The Research on the Offsetting for 2D-compound Curves,TP391.72
  11. The Method of Automatic Contouring Mapping and Realization on Computer,TP391.41
  12. The Research of the Local Subdivision for Triangle Mesh in 3D Terrain,TP391.41
  13. Research and Realization of Offset Interference Processing for Profile-loop,TP391.72
  14. Control of metal belt CVT steel belt misalignment,TP212
  15. Scattered Datas Reconstruction,O242
  16. Interactive fabric scene simulation system design,TP391.9
  17. Studies on Modeling Techniques of Swept Volumes,TP391.7
  18. Simplification of Triangular Meshes and Iso-surface Extraction,TP393.01
  19. Some Methods of Constrained Surface Parameterization and Skeleton Extraction and Their Applications,TP391.41
  20. Study about the Parameterization of Triangular Surface,O186.11
  21. The Generation of Triangle and Quadrangle Finite Element Mesh and Development of Corresponding Generator Based on Autocad,TP391.72

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Machine-assisted technology
© 2012 www.DissertationTopic.Net  Mobile