Dissertation > Excellent graduate degree dissertation topics show

The New Type Control Strategies Research of Active Power Factor Correction

Author: LiuZuo
Tutor: WangHongHua
School: Hohai University
Course: Power Electronics and Power Drives
Keywords: Active Power Factor Correction Input current shaping technique Single Neuron Fuzzy Control Digital Signal Processor
Type: Master's thesis
Year: 2007
Downloads: 439
Quote: 0
Read: Download Dissertation


This article Boost converter for the object , and focus on the topology of new nonlinear control and intelligent control algorithm APFC system . The conventional average current method is necessary to detect a Boost converter input voltage, input current and the output voltage , the control circuit becomes complicated , the nonlinear distortion of the multiplier also increases the ripple content of the system , we studied a novel input current shaping technology ( ICST ) . As the inverse process of the the traditional average current law , ICST technology topology is simple, without the multiplier , the input current to track the input voltage in a switching cycle , the theoretical analysis and simulation results show that dynamic better , APFC system resistance simulation \APFC system control object nonlinear and time-varying characteristics of the traditional PID control is difficult to achieve satisfactory results , this paper, intelligent control method to improve the capacity of the system 's anti- load disturbance . Fuzzy control and single neuron control can take advantage of its nonlinear variable structure , look for classy advantages to overcome the shortcomings of the traditional PID control , and thus the ability to improve the system of anti - load disturbance . Simulation studies have shown that the two advanced PID controller is better than the traditional PID controller . Finally the control core TMS320F2812DSP chip based on single neuron control algorithm APFC system 's hardware and software design .

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Research of a Novel High Efficiency PFC Circuit Based on One Cycle Control,TM46
  3. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  4. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  5. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  6. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  7. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  8. The Research of Control System of Permanent Magnet Synchronous Motor Based on DSP,TM383.42
  9. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  10. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  11. Design of Intelligent Supervisory Control System for Wastewater Treatment,TP277
  12. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8
  13. Research on Grinding and Classification Process Control of Sijiaying Concentrator,TP29-A1
  14. Design of the Adjustable Parameter ECG Signal Generator Based on DSP and MCU,TP368.12
  15. Research on pH Value of the Control Technology for Acid-contained Wastewater Integrated Treatment System in Ningxia Hengli,TP273
  16. Study on Industrial Boiler Water Level Control System,TP273
  17. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  18. Automotive the starter performance of high-precision high stability of the test method and application,U467
  19. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  20. Study on Autoleveller System of Drawing Frame Based on Adaptive Control and Fuzzy Control,TS103.3
  21. AUV Integrated Navigation Algorithm Study and System Implementation,U666.1

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile