Dissertation > Excellent graduate degree dissertation topics show

The Design of Mould Level Controller

Author: CuiHaiJing
Tutor: WangKeCheng
School: Liaoning University of Science and Technology
Course: Control Theory and Control Engineering
Keywords: mould level control structure singular value μsynthesis
CLC: TM571
Type: Master's thesis
Year: 2006
Downloads: 208
Quote: 3
Read: Download Dissertation

Abstract


The control system of mould level is crucial to improve the slab quality in the continuous casting process. PID controller is used in the traditional mould level control and it has some defaults, such as: at the start-up or finishing period of casting or during the changeover of tundish overshoot is high and adjusted time is long, stopper and the submersed nozzles lead to the accuracy of control become bad; the abrupt falloff of block in the submersed nozzles makes the level acutely fluctuation, and PID control can not overcome the disturbances resulted from the change of casting speed.Based on the careful analysis on the difficulties, which the mould level control system encounters, and scrupulous research on many controllers which applied to the mould level control system, a controller which used structure singular value μ method is adopted in this paper, which aimed at taking place of the old PID parameters controller for which bad control effect. Although the structure singular value μ method has been applied in many fields, it is not reported that the structure singular value μ method be applied to the mould level control system, according to the present information.When we design the controller using the structure singular value μ method, because it is very difficult to design μ controller directly, it usually uses D-K iteration proceeding, which uses D and K carried through minimization step by step. That fixed up D first, using H_∞ theory find out the problem of the minimization of K, getting the optimal solution. Then fixed up K, using convex optimization theory, find out the optimum nominal matrix D. μ synthesis can be solved through iteration. Base on the number of iteration the controller that satisfied precision limited could be found.After researched structure singular value μ method, simulation experiments are shown in this paper, which demonstrated this controller is feasible. The result of the experiment manifests: the controller using structure singular value μ method has the following character: short transient time; excellent control accuracy and so on.

Related Dissertations

  1. Optimization Design of the Mould of Water Lubricated Rubber-alloy Bearings,TH133.3
  2. Parameterized Mould-making of Face Gear with Helical Involute Pinion Used on Fishing Tackle Industry,S972
  3. Design and Manufacturing on Grid Composite Cylinder Structures,TB332
  4. Based on the study of the boiler water level of the PSO algorithm generalized predictive control,TP273
  5. The Study of Realizing the Interface and Low-Level Control of Electrimagnetic Interference Fault Diagnosis Based on Labwindows/CVI,V267
  6. Research on the Micro-embossing of Infrared Glass,TN305
  7. Research on Radio-over-Fiber Transmission Techniques for Multi-band Wireless RF Signals,TN929.11
  8. Coupled Simulation on Field Flow and Temperature Field in the Beam Blank Mould,TF777
  9. The Property Study of Steel Mould Shaped Material by Arc Spraying,TG174.44
  10. Research and Design of UG-Based CAD of the Cooling System for Injection Molding,TP391.72
  11. Robust Repetitive Control for Permanent-magnet Linear Synchronous Motor,TM341
  12. Construction Quality Contral of Concrete Structure,TU755
  13. Design and Manufacturing of PM Gear with High Strength and Complexity,TF124
  14. Complex holemaking tools 4C key technology and system integration technology research,TG71
  15. Analysis on the Condition of Molding and Characteristic Parameter of Foamed Aluminum Mould,TB383.4
  16. The plastic optical fiber access network and its optical coupling technology research,TN929.18
  17. Numberial Distribution Feature of Soil Microbe and the Species Diversity of Mould in the Baishuijiang Natural Reserve,S154.3
  18. Surface Modification of 7075 Al Alloy Using Plasma Implantation and Deposition,TG174
  19. The School Image and Its Molding,G40-052.4
  20. A Study on Design and CAD/CAM Application for Refrigerator Vacuum Forming Mould,TP391.7
  21. Study on Application of Predictive Control and Variable Frequency Speed-adjusting in Distributed Control System,TP273

CLC: > Industrial Technology > Electrotechnical > Electrical > Controllers,contactors, starters,solenoid > Controller
© 2012 www.DissertationTopic.Net  Mobile