Dissertation > Excellent graduate degree dissertation topics show

The Modeling and Operation Optimization Strategy for the Pulverizing System of Medium Speed Mill Direct Firing

Author: TianDan
Tutor: TianLiang
School: North China Electric Power University (Hebei)
Course: Control Theory and Control Engineering
Keywords: Automatic control technology Boiler Milling System Dynamic model Mechanism Analysis Optimal load distribution
CLC: TM621.7
Type: Master's thesis
Year: 2009
Downloads: 87
Quote: 1
Read: Download Dissertation

Abstract


The speed grinding blowing straight milling system as the research object , using the method of combining mechanism analysis and data fitting , set up to the amount of coal , the dynamic model of an air volume of the total amount of fuel into the boiler furnace . And the model in the variation of the main parameters of the analysis . The amount of on-site fuel perturbation experiments and simulation results show that the model can reflect the dynamic characteristics and nonlinear characteristics of the milling system with good reproducibility . On this basis , the parallel operation of multiple mill optimization strategy analysis . SIS historical data , pulverizing unit consumption optimization objectives , to fit the relationship between the amount of coal conic through the excel the milling unit consumption , and then equal incremental method to solve the optimal load distribution of the coal pulverizer . Optimize the allocation of validity the pulverizing system power consumption optimization analysis and comparison , and explore a slight increase of the rate of the mill load .

Related Dissertations

  1. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  2. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  3. Design of the Adjustable Parameter ECG Signal Generator Based on DSP and MCU,TP368.12
  4. Dynamic Characteristics and Operational Modal Analysis of Wind Turbine Gearbox,TH132.41
  5. Analysis of Nonlinear Vibration of the Low Noise Vibratory Digging System with Multiple Movement Pair Clearances,TB533
  6. Study on Lysozyme Crystallization Induced by Ionic Liquids and Its Mechanism,O629.8
  7. Parameter Identification and Simulation Research of the Turbo-generator Unit Speed Governor System Dynamic Model,TM311
  8. Study on High-rate Anaeobic Reactor Treating Municipal Wastewater,X703
  9. Analysis of Mechanism and Study of Numerical Simulation on Coalmine Floor Water Inrush,TD745
  10. The Preliminary Study on the Interfusion Anaerobic Fermentation of Kitchen Waste and Its Dyanmic Model,X705
  11. Nonlinear Model and Control Scheme Comparison and Analysis for Power Units,TM621.6
  12. SBR wastewater treatment process design of the automatic control system,TP273
  13. Application of Data Mining in OPGW Lectotype,TP311.13
  14. Study on the ABR-Biological Contact Oxidation Joint of Process Juice Wastewater Treatment,X703
  15. Study on Pyrolysis of Printed Circuit Boards at Medium-level Temperature,X705
  16. Numerical Simulation of Microbial Pollutant Particle Dispersion around Buildings,X50
  17. Study on Mechanism and Technology of Fluoride Removal from Drinking Water by Adsorption-ultrafiltration Process,X703
  18. A Study on Biomass Accumulation of Cucumber Plants in Controlled Enviroment,S642.2
  19. Study on Biological Aerated Filter for Phosphorus and Nitrogen Removal,X703
  20. A Test Study of the Effect of Train Dynamic Load on Gravity Retaining Structures,U213.152.2
  21. Research on Dynamic Life of Ball Bearings for Machine Tool Spindle,TH133.3

CLC: > Industrial Technology > Electrotechnical > Power generation, power plants > Power plant > Thermal power plants, thermal power stations > Auxiliary equipment
© 2012 www.DissertationTopic.Net  Mobile