Dissertation > Excellent graduate degree dissertation topics show

Switching power -DC/DC converter design

Author: ZhuZhiYong
Tutor: LiPing；CuiZiZhong
School: University of Electronic Science and Technology
Course: Electronics and Communication Engineering
Keywords: DC/DC converter PWM PFM
CLC: TM46
Type: Master's thesis
Year: 2009
Downloads: 592
Quote: 0
Read: Download Dissertation

Abstract


The fast development of handy-terminals drives the growth of DC/DC converters. Small, low power, high efficiency produces are more and more popular. At first, this thesis will introduce the DC/DC converter’s classify, elements and typical structure. And then, based on a program (a small, high efficiency PWM DC/DC converter) make farther analysis.The first chapter of this thesis is an introduction of DC/DC converter. Chapter two class the DC/DC and explain the elements. Chapter three shows the details of PWM mode—the most popular mode. Chapter four comes to the project of a small, high efficiency PWM DC/DC converter. Chapter five is the simulation of the project. Chapter six is the layout of the project. Chapter seven refers to the integrate resistors and capacitors. Chapter eight is the summarize.The emphasis of this thesis is the design of a DC/DC converter. This converter is a low-noise, pulse-width-modulated (PWM), DC-DC step-down converter. It powers logic and transmitters in small wireless systems such as cell phones, communicating PDAs, and handy-terminals. The device features an internal synchronous rectifier for high efficiency; it requires no external Schottky diode. Excellent noise characteristics and fixed-frequency operation provide easy post-filtering. It is ideally suited for +3V or +5V fixed input applications.The device operates in one of four modes. Forced PWM mode operates at a fixed frequency regardless of the load. Synchronizable PWM mode allows an external switching frequency to control and minimize harmonics. Idle Mode (PWM/PFM) extends battery life by switching to a PFM mode during light loads. Shutdown mode places the device in standby, reducing quiescent supply current to under 0.1μA.

Related Dissertations

  1. Model of Cylinder Controlled by On-Off Valve and System of PWM Control,TH138
  2. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  3. Research on the Control Scheme of Hybrid PWM Rectifier under Unbalanced Voltage,TM461
  4. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  5. Drip Irrigation Control System Based on Pulse Width Modulation (PWM),S152.7
  6. The PCH modeling and control of PWM rectifier,TM461
  7. Study and Realization on the High Power Factor Switching Power Supply,TN86
  8. Design of Controller on Solar LED Lighting System,TM923.34
  9. Study on Z-Source Energy Feedbake Type AC Electronic Load,TM461
  10. Study of Digital Controlled Bi-directional DC/DC Converter,TM46
  11. Design of Power Inverter Based on MCU Control,TM464
  12. Research on Electromagnetic Interference of PWM Traction Inverter in Locomotive,TM464
  13. Stand-alone PV system,TM912
  14. The Research on a Battery Charging and Discharging Device Based on Three-phase PWM Rectifier,TM461
  15. The Application of PWM Technology in AC-drive Electric Locomotive,TM461
  16. The Research of Isolated DC/DC Converter with Low Voltage/High Current Output Based on Secondary-side Control,TM46
  17. Design of a Digital High-Voltage Power-Supply Based on CPLD,TM46
  18. Research on PWM Rectifier and Director Current Control Technology,TM461
  19. Based on sigma-delta modulation , low noise , high efficiency buck DC-DC converter with,TM46
  20. Research and Implementation of Battery Discharging Module of Photovolatic Power System,TM912
  21. The Study of Dual-pwm Variable Frequency Speed Regulatjon System,TM921.51

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile