Dissertation > Excellent graduate degree dissertation topics show

Study on Red Mud Foamed Concrete and Its Engineering Application

Author: WuXiJun
Tutor: ZhouXiaoDe;WangQunLi
School: Xi'an University of Technology
Course: Environmental Engineering
Keywords: Red mud Foam concrete Vesicant Orthogonal test Magnesium oxychloride cement
CLC: X758
Type: Master's thesis
Year: 2006
Downloads: 506
Quote: 1
Read: Download Dissertation


The red mud ( red mud ) is a waste generated with bauxite, alumina process is extremely complex chemical composition . Red mud of China's annual emissions of about 500 million t , most of which are directly built of red mud dam in the open air , long-term occupation of large areas of land and farmland . Some chemicals by various means infiltration into the groundwater , endangering the health of residents . The red mud contains large amounts of alkaline substances , and Portland cement is alkaline substances , can not be mixed in accordance with the traditional craft production of building materials , the subject of magnesium oxychloride cement instead of portland cement test . In this paper, test red mud , MgO , MgCl2 , sand, foam liquid , water-cement ratio and admixtures of red mud foam concrete performance . On orthogonal test method best fit than the density of 800kg/m3 red mud foam concrete , mud, bubbling liquid , MgO and MgCl2 content on foam concrete is the most significant . As independent variables to the four established four linear regression equation model , and obtain the coefficients of the regression equation , ideal total correlation coefficient test showed that model . Finally, the SPSS software to further verify the four linear regression equation model , the obtained equation coefficients and correlation coefficient and the previous fully consistent , and convenient . SEM testing means the the foam pass , aperture foam concrete strength , the red mud foam concrete microstructure and water resistance of magnesium oxychloride cement foam concrete mechanism analysis, its hydration process also carried out the corresponding analysis . In addition, magnesium oxychloride cement foam concrete mechanism of the role of the modifier related experiments and found that phosphate has good water resistance effect , at the same time to determine the appropriate dosage range . Design suitable for industrial production of red mud foam concrete production line , the product process , the technology has been in Shandong Aluminum Company cement plant started trial production . This indicates that the red mud foam concrete can be commercially successful , and will also be available for enterprises to create a good economic and social benefits .

Related Dissertations

  1. Powered Activited Carbon-UF for Treating Micro-polluted Surface Water,X703
  2. Process Optimization and Degradation Kinetics for Microwave Vacuum Drying of Different Traditional Chinese Medicine Extract,TQ461
  3. Study on Extracting Process of Rhizoma Alismatis and Rhizoma Smilacis Glabrae and Their Hypouricemic Effects,R284
  4. The Research of Synthesis of Bisphenol-A Polycarbonate Through Melt Transesterification Process,TQ323.41
  5. Applied Research of Emulsified Fuel on S195 Diesel Engine,TE626.24
  6. Investigation of Plasma Sprayed NiCr-Cr3C2 Coating on Mould CrZrCu Alloy Plates,TG174.442
  7. The Influence Analysis of the Design Parameters of Large-span High Piers Bend Continuous Rigid-framed in the Natural Oscillation and Earthquake Response,U441.3
  8. Development of High-performance Modified Asphalt Emulision for Ultra-thin Wearing Course Interlayer Bonding Materials,U414
  9. Preparation of Desulfurizer Utilizated for H2S in Fuel Gas by Red Mud (Steel plant) and Shite Mud (Soda Plant),X701.3
  10. Study on Preparing Composite Coagulant FC with Fly-ash and Red-mud,X703.5
  11. Optimization of the process parameters of the cigarette filter rod forming equipment opener,TS43
  12. The Study of Foam Finishing Liquid and Foam Performance and Application in Production,TS195.5
  13. Study on Organic Additives Applied to Electrodeposited Copper Foil,TF811
  14. Design and Simulation of Pressure Casting Process for Magnesium Steering Wheel,TG249.2
  15. Formulation Design and Performance Studies on Silicate Heat-insulating Coating,TQ630.7
  16. Study on the Preparation and the Quality Standards of the Wuhuo Depressurization Dripping Pills,TQ461
  17. Study on New Flocculants by Inverse Emulsion Polymerization and Its Performance,TQ314.24
  18. Investigation of the Needleless Electrospinning Processes,TQ340.6
  19. Preparation Organic Multi-Fertilizer Contain Silicon from Coal Gangue/Coal Ash and Crop Straw,TQ444
  20. Process Optimization for Injection-Compression Molding Based on CAE,TQ320.662
  21. The Study on Extraction of Asparagus Peel Flavonoid and Its Antioxidation Effect,TQ461

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > Mining, metallurgical industry,waste disposal and comprehensive utilization > Metallurgical Industry > Nonferrous Metals Industry
© 2012 www.DissertationTopic.Net  Mobile