Dissertation > Excellent graduate degree dissertation topics show

Fast Three-dimensional Finite Element Simulation in Eddy Current Testing of Defects in Steam Generator Tubes

Author: XiaoZuo
Tutor: ChenDeZhi
School: Huazhong University of Science and Technology
Course: Motor and electrical
Keywords: eddy current testing finite element method Analytical Method Tube APDL
CLC: TL353.13
Type: Master's thesis
Year: 2009
Downloads: 99
Quote: 0
Read: Download Dissertation

Abstract


Nuclear energy is accepted as safe clean efficient sources of energy. So nuclear power plant is popular in an increasing number of countries. Steam generator is an important component of the nuclear power plant. Because of the existence of defects in tube, nuclear power plant is often shut down in order to maintain it. Sometimes defects lead to nuclear power plant accident. Therefore, it is very meaningful and necessary to study the flaws in tube.These defects are usually very small. If finite element method is only used, the model must be meshed enough, considering the skin effect and In order to achieve engineering precision. It will spend a huge amount of calculation and a considerable computing time. Sometimes general computer simply can not complete it. So, in this paper the use of the finite element method and analytical method are combined with. The field is first calculated when no flaws exist. Then a three-dimensional perturbation model, including defects and a part of tube and air. The conversion value of the field when no flaws exist is loaded as a source to the perturbation model. Cycle control and data interchange are implemented by using APDL. Finally, the coil impedance is calculated, through the use of Superposition method. The simulation result shows that the method in this paper is correct.The relationships among the coil impedance, phase angle and the diameter, depth of the defects, as well as factors such as the frequency of the detection, are analyzed in this paper. These contribute to the identification of defects.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  4. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  5. Study of Microwave Assisted Incineration of Asphalt Flue Gas,X701
  6. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  7. Study on the Digestive Tube During the Embryonic Stage of Gushi Chicken,S831
  8. Comparative Study of Internal Intestinal Splinting with Long Nasointestinal Tube Vs. Traditional Ileus Surgery,R656.7
  9. Investigate the Value of CT Reconstruction of Multi-mode After T-tube Cholangiography or ERCP in the Biliary Tract Disease,R657.4
  10. Provincial governing county perspective of provincial and county Relations,D630
  11. Preparation of polyaniline nanostructures , characterization and biomedical applications,TB383.1
  12. Research Implementation of Crack Detection Method Based on Its Acoustic Property,TP274
  13. Study on Alloying of 2Cr13 Martensitic Stainless Steel for Oil Country Tube Goods Use,TG142.71
  14. Theoretical Study and Simulation of Hydrocyclone Separator,TH237.5
  15. The Band Structure in 2D Resonant Phononic Crystal,O735
  16. Numerical Simulation and Influence Factors of Heat Transfer Cooler,TQ021.3
  17. On Design and Application of Neutron Moisture Meter,TH83
  18. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  19. Study of the Temperature Distribution Model and Designing Method for Efficient Shell-and-Tube Heat Exchangers,TQ051.5
  20. Research on Bacterial-Cellulose Coating Small-Caliber Artificial Blood Vessel,TS106.67
  21. Design, Modeling and Fabrication of Micropump Actuated by Laser-induced Shock Wave,TH38

CLC: > Industrial Technology > Nuclear technology > Engineering of Nuclear Reactors > Reactor components and the design, manufacture > Circuit and its equipment > Thermal equipment and cooling system > A steam generator and a heat exchanger
© 2012 www.DissertationTopic.Net  Mobile