Dissertation　

About 245 item dissertation in line with APDL query results,the following is 1 to 50(Search took 0.098 seconds)

  1. Feaand Optimization of No-Till Planter Base on Solid and Shell Super Element,ZhangQiang/Shandong University of Technology,0/23
  2. Analysis and Improvement of the Aseismic Reliability of the Reinforced Concrete Structure,NiuLu/Nanchang University of Aeronautics and,0/51
  3. Optimum Design and Instantaneous Dynamic Response Analysis of the Reticulated Shell Structure Based on APDL,ChenMingMing/Hebei University of Engineering,0/32
  4. Numerical Analysis of Roller Compacted Concrete Gravity Dam's Thermal and Stress Field Based on the Equivalent Age,JiangSheng/Zhejiang University,0/10
  5. The Optimization of the Crane of Large and New Type Catamaran,WangZhen/Tianjin University,0/0
  6. Study on the Cast-in-place Construction Technology of Reinforced Concrete Arch Bridge,ZhuZuo/Chongqing Jiaotong University,0/16
  7. Static Analysis of the Whole Structure and Research of Steel-concrete Composite Pylon of Cable-stayed Bridge with Single Water-drop-shaped Pylon,ShiYiChun/Hefei University of Technology,0/37
  8. Parametric Analysis of Cone Assembly Fluid Damper Based on ANSYS Software,RenLiLi/National University of Defense Science and Technology,0/24
  9. Research and Application of Tower Crane Parametrized Structural Analytical Technology Based on CAD and FEM,NiuJianYu/Harbin Institute of Technology,0/18
  10. Double beam bridge crane trolley lightweight research based on ANSYS,HuangJingJing/Taiyuan University of Science and Technology,0/0
  11. Research on Parametric Finite Element Analysis Method of Bridge Crane Trolley Frame,LiBin/University of North,0/4
  12. Analysis of the particle swarm algorithm telescopic jib optimization and finite element based on the,HouXiaoYan/Taiyuan University of Science and Technology,0/0
  13. Parametric Modeling and Finite Element Analysis for FA Transmission,TaoYing/Dalian Jiaotong University,0/7
  14. Research of Parametric Design and Topology Optimization of T2120Deep Hole Drilling and Boring Machine Basic Parts,PanHongJun/University of North,0/6
  15. Study on High-frequency Induction Bending of the Sheet Metal Multifield Coupling FEM and Simulation Based on APDL Language,AnGuoYin/Chongqing Jiaotong University,0/44
  16. Rare special thread casing pipe in application of Southwest Oil and gas field.,LiaoLing/Southwest Petroleum University,0/13
  17. Parametric Modeling and Finite Element Analysis of Decomposing Furnace,LiLiang/Tianjin University,0/4
  18. The Study on Design,Manufacture and Vibration Testing of the Robot Prototype,LiLiuLin/Guangxi University,0/155
  19. Research of Fiber Bragg Grating Accelerometer Based on Composite Material,WangJiangYi/Wuhan University of Technology,0/96
  20. A Optimize Design of the Switch Box Structure Based on ANSYS,YanLiang/University of Electronic Science and Technology,0/88
  21. Design of Nacelle Structure of Horizontal Axis Tidal Turbine against Different Failure Modes,Ahmad Zamir Chaudhry/Harbin Engineering University,0/11
  22. Parametric Finite Element Analysis of Steam Turbine Blade Based on ANSYS,MaZheng/Shanghai Jiaotong University,0/209
  23. The Development of Computer Aided Design System for Lattice Spreader,DongLei/Dalian University of Technology,0/28
  24. Parametric Modeling and Shape Optimization of Six Typical Double Primary Ribs Reticulated Dome,WangChao/Shandong Institute of Architecture,0/46
  25. Parametric Modeling and Shape Optimization of Four Typical Schwedler Reticulated Shell,WuJing/Shandong Institute of Architecture,0/35
  26. Parametric Modeling and Shape Optimization of Six Typical Double Reticulated Dome,WangQing/Shandong Institute of Architecture,0/87
  27. Study on the change of stress gradient material replacement simulation of arch dam stress concentration region,JiangChengJie/Kunming University of Science and Technology,0/0
  28. Yielding and Buckling (FE) Analysis of Offshore Wind Turbine Installation Ship (OWTIS) as Per ABS and DNV Rules,Adil Farooq/Harbin Engineering University,0/46
  29. Buckling Strength Analysis of Stiffened Panels of Ship Structures Using Non-linear FEM,Sheikh Ahsen-ud-din/Harbin Engineering University,0/7
  30. Research on Wind Loads and Environmental Charts for Storm of Jack-up Platform,LinChangGang/Dalian University of Technology,0/82
  31. Optimization on Welding Reinforcing Plates of Aerial Platform Fire Truck,LiJiang/Dalian University of Technology,2/71
  32. Fatigue Analysis of Bus Skeletion and the Secondary Development,MaRuiXue/Northeastern University,0/83
  33. Research of the Preloaded Load and Finite Element Analysis on Main Reducing Gear of Micro-vehicle Drive Axle,ZengXueNing/Wuhan University of Technology,0/108
  34. The Study of Finite Element Analysis of Planet Carriers at All Levels of DGZ6Shield Reducer,ZhangYaFang/Shenyang University of construction,0/100
  35. The Analysis of Wind-Induced Vibrat-Ion Response Based on Four-Span Insulated Overlap,WangYingBo/Southwest Jiaotong University,2/19
  36. Design and analysis of gun parameters,ZhuDaWei/Nanjing University of Technology and Engineering,0/4
  37. Study on Optimization of Actuators and Sensors for Intelligent Truss,ZhangShiJun/Hebei University of Engineering,0/74
  38. Strength Analysis and Structural Ptimization of the Main Landing Gear’s Wheel-Hub,ChenYuChen/Nanjing University of Aeronautics and Astronautics,0/288
  39. Finite Element Analysis and Optimum of Forklift with Stand Operation and Front Loading’s Mask Structure,WuZuo/Zhejiang University of Technology,0/0
  40. The Finite Element Analysis for Vibration Modal of the Crane Hoisting Arm,BaiYingGuang/Northwest University of Science and Technology,0/3
  41. The Development and Optimization of Design and Computing Platform of Fixed Jib of Wheeled Crane Based on the Analytical Method,DuHaiLong/Jilin University,0/21
  42. Serialization Design and System Exploiration of Deck Crane Boom,HuangQiuZuo/Jiangsu University of Science and Technology,0/70
  43. Parametric Modeling and Analysis System of Truck Crane Boom,HouJianHong/Jilin University,0/75
  44. Crawler crane boom structure optimization design and finite element analysis,ZhangYuXing/Taiyuan University of Science and Technology,0/104
  45. Effect on Deformation of All-terrain Crane Boom with Different Calculating Methods,LiYanYan/Dalian University of Technology,1/75
  46. Research on truck crane telescopic boom design and stochastic finite element reliability analysis,GaoJinJin/Taiyuan University of Science and Technology,0/128
  47. Digital Design for the Structure of Gantry Crane,LiWei/Wuhan University of Technology,0/156
  48. Study on reliability evaluation method of variable structure of the overhead travelling crane girder at,WangJianHua/Taiyuan University of Science and Technology,0/225
  49. Modular Design and Research on the Flat-top Tower Crane Based on APDL,LiuJiangKun/Dalian University of Technology,2/174
  50. Research on Finite Element Analysis and Optimization System of Gantry Crane Based on APDL,DingBaoAn/Wuhan University of Technology,3/225

Total 5 Pages First Previous 1 2 3 4 5 Next Last

© 2012 www.DissertationTopic.Net  Mobile