Dissertation > Excellent graduate degree dissertation topics show
Experimental Studies of Low Calorific Premixed Gases Combustion in Porous Media with Reciprocating Flow System
Author: LiTao
Tutor: ChengLeMing;ShiZhengLun
School: Zhejiang University
Course: Engineering Thermophysics
Keywords: low calorific gases reciprocating flow porous media regenerative section oxygen content flammability limit fluctuation characteristic
CLC: TK16
Type: Master's thesis
Year: 2010
Downloads: 44
Quote: 0
Read: Download Dissertation
Abstract
|
Due to low heat value and complex composition, low calorific gases whose heat value is below 6.28MJ/m3 are not exploited and directly discharged. They contain large amounts of methane, greenhouse effects of which are 21 times more than carbon dioxide. The efficient transformation of methane to carbon dioxide will bring us huge environmental and economic benefits. In this thesis, combustion technology in porous media with reciprocating is used to deal with these low calorific gases, and some studies have been done to expend the system’s flammability limit. Some low calorific gases are made up of combustible components and inert components, and don’t contain oxygen. In order to study these gases’combustion and pollutant emission characteristics in porous media combustor with reciprocating flow, the mixture of nitrogen and natural gas is used to simulate these gases. The work done by this article mainly includes two parts:First, experimental studies of flammability limit of low calorific gases combustion in porous media with reciprocating flow system. Effects of regenerator section on temperature fluctuation and distribution, variation characteristics of axial temperature distribution and flammability limits were investigated experimentally. The results show that adding regenerative sections leads to reduction of temperature fluctuation amplitude and increase of combustion temperature and efficiency; With the increasing of equivalence ratio, the shape of axial temperature distribution has continuous changes, from saddle-shaped, ladder-shaped, oval-shaped to triangle-shaped when the system works on flammability limit; With the reducing of half-period, thermal load and inlet gas velocity, the system’s flammability limit firstly decreases and then increases; With increasing of heat storage capacity of regenerator section, the flammability limit is slight lower. The flammability limit can be extended to the low equivalence ratio of 0.07, corresponding to the heat value of 264kJ/m3.Second, experimental studies of anaerobic gases in porous media with reciprocating flow system. The effects of the heat value of mixed fuel gases (the mixture of nitrogen and natural gases)、oxygen content and air equivalence ratio on combustion and pollutant emission characteristics are investigated experimentally; Compared with simple porous media burner, analysis the advantages of reciprocating flow system. The results show that:With the reducing of heat value of mixed fuel gases, the length of high-temperature zone shortens, the average temperature and combustion temperature increases; with the reducing of oxygen content and air equivalence ratio, the combustion temperature firstly increases and then decreases, the exhaust gas temperature decreases, and oxygen contents of the maximum combustion temperature on certain air equivalence ratio are different, the air equivalence ratio higher, the oxygen content lower; Compared with simple porous media burner, the air equivalence ratio is lower when T/Tad=1, and the emission concentration of NOx and CO is lower; With the reducing of air equivalence ratio, the heat value of flammability mixed fuel gases firstly decreases and then increases, the oxygen content of flammability limit rise. The flammability limit can be extended to the mixed fuel gases heat value of 447.35kJ/m3, the oxygen content of the oxidizer of 3.5%, corresponding to the premixed gases heat value of 373.2 kJ/m3. In better combustion condition, the CO emission concentration is below 15ppm and the NOX mission concentration is below 5ppm.
|
Related Dissertations
- A Coupling Model of the Relative Permeability of Porous Media,O357.3
- Dynamic response of porous media,O357.3
- Mine -scale coal bed temperature distribution law of,TD727
- Microscopic Seepage Mechanism Research for Fractured Porous Media,P618.13
- Some Applications of CFD in the Engineering,O35
- Porous media, numerical simulation of heat and mass transfer process - tobacco curing process simulation technology research,TS41
- Sintered annular cooler flow field and the numerical simulation of temperature field,TK124
- Variations of Fatty Acid Profiles from Yak (Bos Mutus) Kidney Fat Undering Different Storage Conditions,S823
- Studies on the Analysis Method of Oxygen Content and Functional Oxygen Distribution in Heavy Oil,TE622.12
- Experimental Study on Optimization Control of Combustion System in Zhang Jia Kou Thermo-electricplant 300MW Boiler,TM621.2
- Explore the Performance and Mechanism of Erythrocytes Oxidative Damages Based on Mice Exhaustive Swimming,R873
- The Numerical Simulations of the Mixing of Hot and Cold Fluids in the T-Junction with Porous Medium,TQ021
- Supercritical Boiler Combustion Optimization Method Research and Application,TM621.2
- The Soft Sensor Based on Predictive Control Algorithm,TP274
- Prediction model based on the plant thermal parameters of the real - time learning strategies and applied research,TM621.4
- Detecting the Correlation of the Near-infrared Parameters of Blood Concentration and Blood Oxygen Concentration of Mammary Gland Lesions and the Pathologic Diagnosis and the Microvessel Density of Tumor,R737.9
- Research on the Risk of Technology of Direct Epoxidation of Chloropropene Production of Epichlorohydrin,TQ223.26
- Application of the Principal Component Analysis Theory in Combustion Optimizing,TM621.2
- Research on Prediction of Oxygen Content in Boiler Flue Gas and Optimization of Combustion System,TK227
- The Research and Application of the Soft Sensing of Oxygen Content in Flue Gases Based on Data Fusion,TK31
CLC: > Industrial Technology > Energy and Power Engineering > Thermal engineering, heat > Fuel and combustion
© 2012 www.DissertationTopic.Net Mobile
|