Dissertation > Excellent graduate degree dissertation topics show

A Study on the Imitate Wood Materials That Can Be Used as Concrete Formwork

Author: LiangRui
Tutor: RuanJiongZheng
School: Jilin Architectural and Civil Engineering
Course: Building Science,
Keywords: Imitating wood materials Concrete Formwork Magnesia cement materials Static bending strength
CLC: TU755.2
Type: Master's thesis
Year: 2010
Downloads: 37
Quote: 0
Read: Download Dissertation

Abstract


Sulfur oxygen magnesia cement materials and wood chips , bamboo , making instead the concrete supporting mold with wood Fangmu material , of this Fangmu material has difficult to burn , not easily deformed , not back to halogen , sawing can be nailed , quality lighter, fire performance , environmental protection and other advantages , in particular, requires no rust on metal . Experimental study on the ratio of the the the sulfur oxygen needed by the the production Fangmu material magnesium gelling material under normal temperature conditions . In order to improve the performance indicators of the cementitious material , respectively on the basis of the reference ratio incorporating a variety of different additives , screened out of the strength is significantly increased admixture of citric acid , sodium citrate , sucrose, through optimization of the admixture of test to determine the ratio of the of thioredoxin magnesium cementitious materials . To further reduce the production cost of the cementitious material . Imitating wood materials water resistance of the inorganic filler ( fly ash and slag ) experiment , comprehensive assessment , the effect of fly ash . Produced a template Fangmu specimen the static bending order to increase Fangmu template strength , making Fangmu , template specimen when the template on the lower surface of each mosaic layer of bamboo or a glass fiber mesh , by detecting the test piece the physical performance , come join bamboo specimen bending strength is relatively high , seven days maximum static bending strength is 16.6MPa, reaching 55% of the value of the project design strength , also of Fangmu template density , water absorption , nail holding power , and other performance testing, performance basically meet the specification requirements for concrete formwork . Actual experimental results can be inferred , wood material and will certainly become a sustainable development of a new type of environmentally friendly construction materials .

Related Dissertations

  1. A Study on Composite Magnesia Cementitious Material and Its Use,TQ177.5
  2. Research on the Application of GRC Concrete Formwork Suspending on the Bolt in Tunnel Supports and Protections,U455.7
  3. A Study on the Connections of Screws and Wood Plastic Composites (WPC),TS653
  4. Engineering Application and Study on New Construction Methods of Finish Concrete Technology,TU755
  5. Research of Precast Concrete Formwork,TU755.2
  6. Study on Wood Curving Technology,TS652
  7. Study on Salix and Concrete Shuttering Panel,TS653
  8. Formwork concrete protective layer of polymer-modified mortar properties,TU578.1
  9. Silo sliding technology research,TU755.2
  10. Study on Techniques of Crack Control in Concrete Structures,TU755
  11. Appliance and Control on Cracks in Cast-in-situ Concrete Floors in Ganzhou,TU755
  12. Study on Writing Safety Special Contruction Plans for High-formwork Project and the Development of Calculation Software,TU755.2
  13. Research and Application of the Large All-steel Formwork in Construction,TU755.2
  14. Temperature Control and Crack Prevention of Mass Concrete for Foundation of High-rise Building,TU755
  15. Research on High Formwork System of Proscenium Beam Considering Time-varying Strength of Construction Structure,TU755.2
  16. The Research of Theoretical Analysis and Experiment on Expansion Reinforcing Strip,TU755
  17. Application Study on Pre-stressed Oblique Lifting-Link in Girder Transfer Structure Construction,TU755.2
  18. Test and Analysis on Load-bearing Capacity of Steel Tubular Falsework with Bowl-button-type Connection,TU755.2
  19. Research on Thermal Stress of Mass Concrete during Construction Period,TU755
  20. Ultra-thin-strip Steel Works Refining Furnase Equipment Foundation Construction of Key Technologies,TU755

CLC: > Industrial Technology > Building Science > Construction > The project and the type of work > Concrete and reinforced concrete works > Template project
© 2012 www.DissertationTopic.Net  Mobile