Dissertation > Excellent graduate degree dissertation topics show

Research on Fault Diagnose of Rolling Bearings Based on Least Squares Support Vector Machine

Author: YangZhengYou
Tutor: PengTao
School: Hunan University
Course: Control Theory and Control Engineering
Keywords: rolling element bearing fault diagnosis wavelet packet transform support vector machine least squares support vector machines Bayesian inference
CLC: TH165.3
Type: Master's thesis
Year: 2009
Downloads: 177
Quote: 1
Read: Download Dissertation

Abstract


Rolling bearings is one of the important parts and used most commonly in rotating machinery, Its working state impacts directly on the whole machine whether it can properly work or not. The fault diagnosis of rolling bearing has a very important practical significance and economic value.For fault bearing generating vibration signals with characteristics of non-stationary, at the same time, failure information of bearing being extracted difficultly with the methods of traditional signal analysis, therefore, an algorithm which based on wavelet packet transform extracting the fault information of rolling bearing is proposed in this paper.For Artificial Neural Network classifier with disadvantage, such as local minimum and slow convergence rate, an algorithm which fault classification of the rolling bearing based on support vector machine(SVM) is proposed in this paper. Simulation and experiments show that training time and testing time of the algorithm are shorter than the Neural Network classifier’s, recognition accuracy of the algorithm is higher than the Neural Network Classifier’s.For training process of Support Vector Machine based on solving quadratic optimization, rate of the training will significantly drop when data sample is large size. So, an algorithm which fault classification of rolling bearing based on Least Squares Support Vector Machine is proposed in this paper to transform the SVM quadratic optimization into solving linear equations. Simulation and experiments show that training and testing rate of the algorithm are faster than the support vector machine’s and the algorithm can get very high recognition accuracy.For the choices of the width coefficient of kernel function, regularization factor and parameters of the algorithm which were proposed being with uncertainties and randomness, an approach based on Bayesian inference methods to hierarchically determine these parameters is proposed in this paper. Simulation and experiments show that the algorithm improves the efficiency of the modeling and raise training and testing speed and high recognition accuracy.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. Research on Automatic Detection Algorithm for Substructure Distress of Highway Pavement Based on SVM,U418.6
  4. Research on Autamatic Music Structrue Analysis,TN912.3
  5. Research on Transductive Support Vector Machine and Its Application in Image Retrieval,TP391.41
  6. Fault Diagnosis Method Based on Support Vector Machine,TP18
  7. Fault Diagnosis Research on Three-Tank System,TP277
  8. Process Support Vector Machine and Its Application to Satellite Thermal Equilibrium Temperature Prediction,TP183
  9. Research on the Key Technology of Waterborne Transport Security System,U698
  10. Research for Infrared Image Target Identification and Tracking Technology,TP391.41
  11. Study on the Road Condition Monitoring Based on Vehicular 3D Acceleration Sensor,TP274
  12. Research of Diagnosing Cucumber Diseases Based on Hyperspectral Imaging,S436.421
  13. The Research on Intrusion Detection System Based on Machine Learning,TP393.08
  14. The Speech Enhancement System Based on Binary Mask and Perceptual Wavelet Packet Transform,TN912.35
  15. Radar circuit board fault diagnosis system hardware integration of research and design,E933.6
  16. Steam Turbine Thermal Analysis and Modeling Principles and Operation Fault Diagnosis,U664.113
  17. Research on Improved K Neighbor Support Vector Machine Algorithm Faced Text Classification,TP391.1
  18. Research on Face Recognition Based on AdaBoost Algorithm,TP391.41
  19. Design and Implementation of the Process Monitoring and Fault Diagnosis for Injection Molding,TQ320.5
  20. Research on Feature Extraction, Selection and Classification Algorithms for Pulmonary CAD,TP391.41
  21. Soft-sensing Technology in the Ethylene Distillation Process Applied Research,TQ221.211

CLC: > Industrial Technology > Machinery and Instrument Industry > Machinery Manufacturing Technology > Flexible manufacturing systems and flexible manufacturing cell > Fault diagnosis and maintenance
© 2012 www.DissertationTopic.Net  Mobile