Dissertation > Excellent graduate degree dissertation topics show

Fatigue Life Analysis and Fatigue Experimental Study of Heat Explosion Pulping Pot

Author: DuSiHong
Tutor: YuanZhenWei
School: Zhengzhou University
Course: Chemical Process Equipment
Keywords: heat explosion pulping pot fatigue analysis finite element method stress analysis
CLC: TH49
Type: Master's thesis
Year: 2008
Downloads: 24
Quote: 0
Read: Download Dissertation

Abstract


Recent years, with the rapid development of oil chemical industry and other industry, more and more pressure vessels need to work in rigourous conditions. In addition, because of other factors, the incidence of pressure vessel’s fatigue failure is increasing, people’s life and fortune suffer great loss from these incidents. So fatigue analysis of pressure vessel is becoming more and more important. How to ensure fatigue failure do not happen in pressure vessel’s available using time has become a focus of people’s concern.Generally, pressure vessel has no evident plastic deformation when happens fatigue failure, and fatigue failure always orgins high stress raisers’ area. A heat explosion pulping pot in engineering is studied in this paper. Firstly, pressure vessel’s fatigue design , influencing factors of vessel’s fatigue failure and so on were expained in detail in this paper. Secondly, in the light of the finite element method, the stress status of the heat explosion pulping pot was analysed in detail by ANSYS10.0, then the stress distribution was obtained. With regard to high stress raisers’ area, the strength assessments and fatigue analysis of the pot were carried out according to Design by analysis of pressure vessel, the fatigue life of the pot was worked out. At last, fatigue life of the heat exposion pulping pot was validated through experiment.Compared with the results of the finite element analysis, the rationality and the reliability of the pot’s structure design and fatigue life design were verified. Also, the paper offers a lot of reference and guidance for project engineering application in a degree.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  4. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  5. The Band Structure in 2D Resonant Phononic Crystal,O735
  6. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  7. Numerical and Experimental Studies for Multi-Cracks of Asphalt Pavement with Semi-Rigid Basement Asphalt,U416.217
  8. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  9. Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
  10. Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33
  11. Scrap copper smelting furnace temperature measurement method,TF811
  12. Space hyperspectral imager Compensation focusing optical system of pre-,TH743
  13. Taking into account the factors shaping car rims multiaxial fatigue life prediction research,TG386
  14. Study of Composite Drive Shaft for an Automobile,U465.6
  15. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  16. Particle reinforced copper matrix composites mechanical behavior of finite element analysis,TB331
  17. Finite element analysis of gear transmission machine and Kinetics,TH132.41
  18. Large opening pressure vessel structural finite element analysis and strength design,TH49
  19. Composite cage rotor induction motor starting performance of the design and research,TM343
  20. More rarely slot reactance permanent magnet synchronous motor parameter calculation and research,TM341
  21. Magnetic induction tomography forward problem and reconstruction algorithm,TP391.41

CLC: > Industrial Technology > Machinery and Instrument Industry > Gas compression and transportation machinery > Pressure vessel
© 2012 www.DissertationTopic.Net  Mobile