Dissertation > Excellent graduate degree dissertation topics show

Research on a New Crash Energy Absorber Method Used in Sled Test

Author: DaiXiaoJing
Tutor: CaoLiBo
School: Hunan University
Course: Vehicle Engineering
Keywords: Sled crash test Energy-absorbing method Computer simulation Testing validation
CLC: U467.14
Type: Master's thesis
Year: 2007
Downloads: 250
Quote: 7
Read: Download Dissertation

Abstract


Vehicle Crash Safety Test is a very important method for evaluating the safety study, obtaining the data for theoretical researches and appraising the safety performance for a new car models. It consists of three main parts: vehicle crash test, sled crash test and bench test. As a significant method for auto passive safety research, sled crash test is mainly used for appraising the performance of the occupant restraint system owing to its similar impact characteristics with vehicle crash test. The crash energy absorber apparatus that used in the sled crash test is to simulate the deformation of vehicle’s front part in a collision and acquire the acceleration curve which is specified by the regulation or a certain vehicle’s acceleration required in particular.In this paper the study and analysis for the development of crash energy absorber devices and their characteristics were carried out firstly. And in terms of these studies, a new kind of crash energy absorber method which was based on the principle of longitudinal crash and vertical energy absorbing had been proposed. Then researches and analysis about this method was made. The simulation analysis showed that this energy absorber apparatus which was designed according to this method could satisfy the requirement of the test of automobile safety equipments. And its good performance was validated by sled crash test. The research of this paper includes three mainly following parts:1. The structure and operating principle of this new crash energy absorber method was proposed.2. The new crash energy absorber apparatus’s computational model was established by finite element methods, and then simulation work had been done to verify its performance. The simulation results showed that many typical kinds of crash acceleration curves can be reconstructed by adjusting the height, variety and number of dampers on the device. It can be used in sled crash test to satisfy the requirement of the test of automobile safety equipments.3. This paper also carried on a set of tests and compared the simulation results with these tests. The research showed that the test results were consistent with the simulation very well. Thereby, the validity of simulation models and the correctness of simulation results were proved, and the validity of this new crash energy absorber apparatus proposed in this paper was testified as well.

Related Dissertations

  1. The Computer Simulation of Roller Drying for Flaky Agriculture Materials,S226.6
  2. Research on Bus Collision and Rolling Simulation Technology,U467.14
  3. Numerical Simulation and Influence Factors of Heat Transfer Cooler,TQ021.3
  4. Study on the Regulatory Role of Ground Source Energy Storage Pool to Indoor Thermal Environment,TU831
  5. Visual simulation system - 3D viewing subsystem design and implementation,TP391.9
  6. Improve control of the hydraulic properties of profiling tool slide,TH137
  7. Li ferrite temperature Preparation and simulation applications,TM277
  8. Research on Operating Coach Rear-end Collision Simulation and Rear-structural Crashworthiness,U467.14
  9. Mathematical Model and Short Memory-based Controller Design of Multi-UAVs,V249.1
  10. Study on the Melting Transition and Creep Motion of Two-Dimensional Vortex Lattice Using Computer Simulation,O511
  11. Mine Pit Hot Environment Forecast Technique Research and Numericl Simulation System Development,TD727
  12. A molecular dynamics study of aqueous solution in the hot steel surface state of motion,TG142.15
  13. Phase-field Simulation of Forced Flow Effect on Solidification Microstructure,TG111.4
  14. Recycling metal crushing test equipment and crushing mechanism,TH87
  15. The Integrated Technology and Application of Twin-screw Compressor,TH455
  16. Research on the Age-dependent Problems of One Dimension Bamboo Forest in Biology Evolution Systems,S795
  17. 3WF-8 -type air feed type orchard sprayer pilot study,S491
  18. Expansion Study on Grain Storage Mechanical Ventilation,S379
  19. Computer Emulator Model of Aircraft Improvement Based on Parameter Identification,TP391.9
  20. Research on Network Plan & Computer Simulation of WiMax Technology,TN929.5
  21. Decision Making on Land Reserve of Real Estate Developers Based on Inventory Control,F301

CLC: > Transportation > Road transport > Automotive Engineering > Vehicle test > Vehicle test > Safety, collision and destruction test
© 2012 www.DissertationTopic.Net  Mobile