Dissertation > Excellent graduate degree dissertation topics show

Study on Distresses for Muti-span Prestressed Concrete Thin-walled Hollow Slab Bridge

Author: ZhouLiMing
Tutor: ShaoXuDong
School: Hunan University
Course: Bridge and Tunnel Engineering
Keywords: pre-stressed concrete thin-walled hollow slab distortion energy method finite strip method interaction of substructure and superstructure largest continuous length cracks of deck pavement
CLC: U445.71
Type: Master's thesis
Year: 2007
Downloads: 129
Quote: 2
Read: Download Dissertation

Abstract


The pre-stressed concrete continuous girder(slab) bridges have simple structure and definite mechanics. They have been extensively used on highway bridge. Along with the highly development of the modern technology on bridge construction and innovation of bridge design theory, this form of bridge has a tendency on longer continuous beam and lighter structure. The tendency obtained much good economic efficiency but also brought with several problems. For example, minify too much on the section of hollow slab results inadequacy bearing capacity, longitudinal cracks by distortion effect, the continuous length is too long together with the failure of bearing device also results inadequacy bearing capacity. Besides, the failure of bridge deck pavement and expansion joints is common occurrence. The paper summarized the typical failures of this form of bridge, and analyzed the failures of Guangxi Tieshangang Crossing-sea Bridge, verified the dominant reasons of the failures, and presented some theoretic reference on this form of bridge.(1) Employed the thin-walled structural theory to investigate the regular longitudinal cracks of the thin-walled hollow slab 20m and 30m span. The energy method and finite strip method were conducted to calculate the distortion stress of the hollow slab under live load, and the distortion analysis on the current standard hollow slab was also presented. The theoretical analysis and the field load test verified that the distortion effect is the dominant reason causing the longitudinal cracks of the hollow slab.(2) Analyzed the dominant factors of transverse effect of distortion, including the width and thickness of boards, transverse diaphragm and lateral join of slabs. Also, present optimization design on section of thin-walled hollow slab.(3) Focus on the longest continuous beam (14×30m), established 2-D FE model which considered interaction of substructure and superstructure to check the stress level and bearing capacity. Further, discussed the rational relation between the stiffness of substructure and continuous length, and presented the largest continuous length on vary substructure base on no-sliding bearing, and investigated rational largest continuous length for whose piers placing two-row bearing.(4) The paper also analyzed the longitudinal cracks of bridge deck pavement along the linkage, by establishing 2-D FE model and 3-D FE model of the illustration which has a 3-bearings support mode together with thin linkage. The calculation results verified the over-thin linkage is the dominant reason causing lateral stress out of limitation, and results the longitudinal cracks of deck pavement.

Related Dissertations

  1. Study of Mechanism Using Two-Direction Pre-Stress to Control Welding Distortion and Hot Cracking,TG404
  2. The Research and Realization on Asymmetric Sine Inverter with Adjustable Frequency and Amplitude,TM464
  3. Research on Ionosphere Contamination of High Frequency Radar Echoes and Time-Frequency Analysis Technology,TN958.93
  4. Rate-distortion Optimization Based Rate Control,TN919.81
  5. Packet Loss Recovering Technology for Speech Transmission over Network,TN912.3
  6. Research on Removal Algorithm of Shadows in Image Segmentation,TP391.41
  7. Multi-storey Steel Structure Design Method Based on Optimum Lateral Stiffness Distribution,TU973.13
  8. Study on Side Information Generation in Distributed Video Coding,TN919.81
  9. The Study of Stability and Deformation for Cao Mao Mountain Tunnel,U451.2
  10. Research on Upgrading of the Industrial Structure from the View Angle of Profit Margin Induction,F272
  11. Research on Mode Decision Algorithm for H.264/AVC Intra Prediction,TN919.81
  12. Research on 4CPFSK Baseband Signal Processing and IC Design Based on DMR Protocol,TN929.5
  13. High Efficiency 3D Video Representation and Coding,TN919.81
  14. A Method for Image Quality Assessment Based on Visual Attention and Structure Distortion,TP391.41
  15. The Aerodynamic Characteristics Research of Top-mounted S-shaped Inlet Based on the Comparison of Two Different Entrance Shape,V211.48
  16. Distortion effects on image quality evaluation and classification,TP391.41
  17. The Research of Image Restoration Based on Phase Diversity Method,TP391.41
  18. LED-based light-field scanning three-dimensional display technology and simulation reduction,TP391.41
  19. Space motion panoramic three-dimensional measurement of small target,TP391.41
  20. Domestic and concrete highway bridge design method comparative analysis,U448.14
  21. Based on Game Theory Innovation Model Audit Fee,F224

CLC: > Transportation > Road transport > Bridges and Culverts > Bridge Construction > Bridge maintenance, repair and remediation > Bridge defects and remediation
© 2012 www.DissertationTopic.Net  Mobile