Ion beam mixing pump with flow processing to improve the tribological properties of Vice

Abstract

Related Dissertations

1. Reactive Hot-Pressing and Mechanical Properties of （ZrB₂-ZrO₂）/BN Composites,TB332
2. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
3. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
4. Research on Servo Control System of Gyro-Stabilized Platform,TJ765
5. Study on the Lubricity of Rape-seed Biodiesel and Its Blends with Diesel Oil,S232.6
6. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
7. Magnesium alloy surface MoS2 / resin hybrid layer Preparation and Properties,TG174.4
8. Influences of TPS Wear Conditions on Auto Driving Performance,U464.136
9. Floating system under the bridge vibration control vehicle braking force,U441.3
10. PC box girder creep effect analysis based on ANSYS secondary development,U448.35;U441
11. The Analysis of the Low Friction and the MBT Appliance During the Tooth Movement in Extraction Treatment,R783.5
12. Preparation of Soft Clay for Bearing Capacity of Model Tests and Study on Installation of Suction Caissons,TU43
13. Research on Pile-Anchor-Soil Interaction of the Anti-slide Pile with Pre-stressed Anchor Cables,P642.22
14. Study on the Corrosive and Tribological Behavior of the Coating of Several Thermo-chemical in the Oil-well Output Liquid,TG156.8
15. Tribological Properties and Corrosion Resistance to Molten Steel of （ZrB₂-ZrO₂）/BN Composites,TB332
16. Research on Hydro-Viscous Soft Braking Device in High-Power Downward Belt Conveyor,TH222
17. Different Design on Frictional Force of Different Bracket,R783.5
18. The Theoretical Analysis and Computer Simulation of Large Deformation and Dynamic Contact on the Inertia-Enforced-Speed Limiter,U463.51
19. Experimental Study and Theoretical Analysis of Staggered Truss Framing System with Friction Dampers,TU391
20. Research on Hydrodynamic Lubrication of Crank Assembly in Diesel Engine,TK423
21. A Study on Friction Mechanism of Micro Plastic Forming for Bulk Amorphous Alloys,TG139.8