Dissertation > Excellent graduate degree dissertation topics show

Cementing Design Optimization Method and Application

Author: DingBaoGang
Tutor: CuiHaiQing
School: Daqing Petroleum Institute
Course: Oil and Gas Well Engineering
Keywords: Cementing engineering Casing Strength Casing string in the middle Construction parameters Optimal design
CLC: TE256
Type: Master's thesis
Year: 2003
Downloads: 1014
Quote: 0
Read: Download Dissertation

Abstract


Good job cementing design, construction , and improve the quality of cementing this paper, the main issues involved in the cementing design the integrated application cementing theory and optimization techniques , to explore a set of system the cementing optimization design method , and cementing design , construction applications , and achieved good results . Strength design of the casing string , a comprehensive analysis of the calculation of the casing string suffered load using generalized HooK law of quantitative analysis of the impact of temperature and pressure changes in the axial force on the casing string and the casing strength and application optimization method sets The column strength design . The design of the casing string in the middle , through the establishment of a three-dimensional casing string mechanics model , using the finite element method analysis solvers , the number and card design casing centralizer discharge position to meet the requirements of the casing centered . Cementing design , application optimization method preferred the cementing fluid rheological model ; analysis of the \volume and pressure changes ; optimize the design of the main parameters of the cementing operation . The application described in this article cementing optimized design software to optimize the design method for the preparation of the cementing good effect in Daqing oilfield cementing design and construction . Field applications prove that the optimization method accurate and reliable design of the casing strength . The new API standards and payload technology to carry out deep well casing design , you can save the casing . Preferred rheological model can be more accurate to describe the rheological properties of the cementing fluid ; dynamic site construction measured coincide with the \to meet the requirements of cementing . Cementing operation to optimize the application of design methods , and to promote the improvement of the the Daqing oilfield cementing design , construction level and cementing quality level .

Related Dissertations

  1. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  2. Deep Continental Drilling Rig Top Drive Hydraulic System Design and Research Summary,TE922
  3. Humaniod Robot Development and Research,TP242
  4. Dynamic Analysis and Optimization of Six-bar Beating-up Mechanism of an Air-jet Loom,TS103.33
  5. Structure Analysis and Optimization Design for 150 Tons Flat-Top Crane,TH213.3
  6. Research of Optimal Design of Power System in High Speed Railway,U223
  7. Optimal Design of Suspender Replacement in Concrete Filled Steel Tubulur Arch Bridge,U448.22
  8. Design and Implementation of Hot-pressing Module for RFID Tag-package Equipment,TP391.44
  9. Study on Modeling and Optimal Design of Capacitively Coupled Electrical Resistance Tomography System,TP212
  10. Simulation analysis and optimization design of pull arm garbage truck,U469.691
  11. Control and Analysis of an Existing Tunnel Vibration Induced by Blasting Construction of Nearby Tunnel,U455.6
  12. The Structure Strength Analysis and Optimization Design of Impact Wheel for Impact Roller,U415.521
  13. Study on the Optimal Design and On-site Construction of Subgrade Suspendible Anchor Retaining Wall,U417.11
  14. Mechanical Properties Analysis and Optimum Design of the Super-span Suspension Bridge with CFRP Cables,U448.25
  15. Reliability Evaluation and Optimization Design of the High Power Reducer Based on Earth Pressure Balance Shield,U455.39
  16. Structure OPT Imitation and Experimental Research on Outer Pipeline Multi-magnetize Inspection Structure,TH878.3
  17. Device dynamics to study and optimize the design of the telescopic handler,TH242
  18. Structural Analysis and Optimization Design for Single-girder Gantry Crane with Double Hook,TH213.5
  19. 120 Tons Gantry Crane Structural Analysis and Girder Structural Optimization Based on Genetic Algorithm,TH213.5
  20. Study on Quantitative Relation between Displacement Vector Angle and Stability Factor & Its Optimized Design,P642.22
  21. Converter Full Suspension the tilting device design optimization and tilting Moment analysis,TF748.2

CLC: > Industrial Technology > Oil and gas industry > Drilling engineering > Wash wells, cementing,completion,reservoir damage and prevention > Cementing engineering
© 2012 www.DissertationTopic.Net  Mobile