Dissertation > Excellent graduate degree dissertation topics show

The Design and Performance Simulation of External Valve Small Displacement Pump

Author: LiXianFu
Tutor: RenZhengYi
School: Harbin Engineering University
Course: Mechanical Design and Theory
Keywords: oil-well pump structural design pump efficiency numerical simulation
CLC: TE933.3
Type: Master's thesis
Year: 2011
Downloads: 29
Quote: 0
Read: Download Dissertation


Now the oil exploitation is in the midst-finial moment, the oil supply capacity is declining and the number of low-yield wells is increasing. As the generated quantity of the large displacement rod pump applied in the oil field is larger and the oil wells have been insufficient for the liquid oil, which makes the problems of the rod oil pump system, including low efficiency, energy consumption, is more and more obvious. So the design and development of the new small-displacement pump is important to exploit the low-yield oil wells of oil fields efficiently.Firstly, based on the summary of the domestic oil exploitation technology and the development trend of pump rod, the overall design of the external valve small-displacement pump has been carried out. The force analysis of the key components of the pump barrel and plunger pumps has been carried out to supply the base for the structural design and strength check of the pump.Secondly, according to the working principle of the new pump, the structural design of the pump has been carried out. The strength check of the pump barrel and the plunger has been carried out, and the results show that wall thickness of the plunger and pump barrel has meet the strength requirements. The static deformation of the elastic sleeve inside the pump barrel seal paragraph under inside and outside pressure difference was simulated by the finite element software ANSYS. According to the maximum deformation 0.126mm, the gap value of the pump barrel and plunger was determined. And the three-dimensional modeling and virtual assembly was carried out by UG to detect the interference of the various parts.Lastly, the simulation method has been adopted to analyze the overall performance of the new pump applied in low-yield wells and pump efficiency changes with the pump suction parameters. The working process of the standard pump has been simulated by the finite element software Fluent. The results of the simulation show that under of two sets parameters error compared with the actual pump efficiency were 9.7% and 2.8%,which proves the simulation method is accurate to guarantee the correctness of the pump efficiency pump by the simulation method. Second, the working process of the new pump has been simulated, the results show that the pump efficiency value of the new pump has been significantly improved compared with the standard the pump efficiency value. And the rule of different strokes, stroke times and sinking change affect on the pump efficiency of the new pump was obtained.In this paper, a new type of small-displacement pump has been designed, the efficiency value simulation of the pump was carried out. And efficiency value simulation has been compared with a standard the efficiency value, the results show the pump efficiency of the new pump has been improved significantly. This is important to reducing production cost and increase exploitation efficiency of low-yield wells.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  19. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  20. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Oil and gas production machinery and equipment > Pumping mechanical equipment > Mining pump
© 2012 www.DissertationTopic.Net  Mobile