Dissertation > Excellent graduate degree dissertation topics show

Study on Synthesis and Properties of Highly Isotactic Polyacrylonitrile

Author: XuJing
Tutor: JinRiGuang
School: Beijing University of Chemical Technology
Course: Information materials
Keywords: polyacrylonitrile carbon fiber isotacticity dibutylmagnesium anionic polymerization pre-oxidation
CLC: TQ325.8
Type: Master's thesis
Year: 2007
Downloads: 324
Quote: 0
Read: Download Dissertation

Abstract


Properties of carbon fiber is directly influenced by the quality of polyacrylonitrile （PAN） precursor, the factors that affet on he quality of PAN precursor, such as the type of polymerization monomer in the polymer, molecular weight, stereoregularity, clean level, spinning method and technique, tensile technique, compacting level by drying, the type of oil and oiling technique and so on, must be paid great attention to prepare the PAN precursor with good properties. The stereoregularity of PAN precursor influences properties of carbon fiber. In this paper highly isotactic（mm>0．50） PAN by anionic polymerization using dibutylmagnesium and triethylaluminum as initiator were synthesized, by means of 13 C nuclear magnetic resonance(13 C-NMR), differential scanning calorimeter（DSC）, Fourier transform infrared ray（FT-IR）, X-ray diffraction（XRD）, highly isotactic PAN and atatic PAN abtained by free-radical polymerization were studied. The process of the preparation consists of: 1、The effects of different reaction conditions on PAN were investigated, the best condition for synthesis of PAN was ascertained: reaction time for 7h; mole ratio of dibutylmagnesium to AN was 1:150; reaction temperature was 130℃.2、isotacticity of PAN were researched through the reaction in the solvent at 130℃. The results show that isotacticity of PAN is different in the different solvent when other conditions are consistent, isotactic content of PAN increased in the nonpolar solvent putted in the appropriate polar solvennt such as diethylene glycol dimethyl ether（2G） and dioxane.3、the triad tacticities of PAN obtained was analyzed by 13 C-NMR, the triad isotactic content of synthesized PAN can achieve 56．5%, the triad syndiotactic content of synthesized PAN is 18．0%,the triad atactic content of synthesized PAN is 15．5%. the triad isotactic content of synthesized PAN increase 31 % comparing with PAN attained by free-radical polymerization.4、By means of DSC、FT-IR and XRD, it is discovered that isotactic PAN releases greater quantity of heat than atactic PAN during the preliminary heat treatment in oxi-dizing and it is prone to Cyclization, accordingly , isotactic PAN form ladder-shaped reticular structure easily; cyano group in the isotactic PAN molecular reacts easily each other to form ladder-shaped reticular structure .

Related Dissertations

  1. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  2. Synthesis and Characterization of High-performance Polyacrylonitrile,O631.3
  3. Study on Enhance Efficiency and Mechanism of BAC Process for Nitrogen Removal by Preoxidation,X703
  4. Carbon fiber reinforced epoxy resin surface treatment and interfacial properties of composite materials,TB332
  5. Surface Treatment of Polyacrylonitrile Based High Modulus Carbon Fibers,TB304
  6. Studies on the Preparation and Properties of ACF/PLGA Scaffolds for Bone Tissue Engineering,R318.08
  7. Study of Composite Drive Shaft for an Automobile,U465.6
  8. Mechanical Properties Analysis and Optimum Design of the Super-span Suspension Bridge with CFRP Cables,U448.25
  9. Effects of γ-RAY Irradiation on T700 Carbon Fiber and Its Composite Interface Performance,TB332
  10. Experimental Study on Basic Mechanical Properties of Domestic Carbon Fiber Renforced Plastic,TB332
  11. Acid sensitive polyethylene oxide - graft - before adriamycin drug synthesis and characterization,TQ460.1
  12. Study on Electrospun PAN Nano-ACF and Its Adsorption Property,TQ342.74
  13. Effect of Rigid Stretch during Stabilization of Polyacrylonitrile Fiber,TQ340.1
  14. Study on the Adsorption Properties of Modified Polyacrylonitrile Fiber for Dyes and Metal Ions,O647.32
  15. Study on the Spinning Solution of High Molecular Weight Polyacrylonitril for Carbon Fibers,TQ340.1
  16. Syntheses and Characterization of Polymers End-functionalized with a Formoxyl Acrylic Group,O631.3
  17. PDMS/PAN Hollow Fiber Composite Membrane for Methanol-Water Separation,TQ028.8
  18. The pyridyl fiber synthesis , characterization and adsorption properties of,TQ340.1
  19. Structural Evolution and Kinetic Analysis during Oxidative Stabilization of Polyacrylonitrile-Based Fibers,TQ342.3
  20. Research on Detective Methods of Engineering Structural Crack and Its Experiments,TU746.3
  21. Preparation and Research of Polyacrylonitrile-Based Carbon Nanotubes Composite Materials,TB383.1

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polymer resin and plastic > Polyacrylonitrile
© 2012 www.DissertationTopic.Net  Mobile