Dissertation > Excellent graduate degree dissertation topics show

Experimental Results of Scramjet Isolator under Ununiformity Supersonic Flow

Author: ZhouChun
Tutor: ZhangYuan
School: Nanjing University of Aeronautics and Astronautics
Course: Aerospace Propulsion Theory and Engineering
Keywords: scramjet isolator shock train ununiformity inflow
CLC: V231.3
Type: Master's thesis
Year: 2006
Downloads: 136
Quote: 1
Read: Download Dissertation

Abstract


Isolator, one important part of the scramjet, located between the inlet and the combustion chamber to prevent the inlet unstart from the pressure pulsation in combustion chamber.A wind tunnel was built to investigate shock trains under ununiformity supersonic flow in a rectangular isolator. The steady characteristics of the flow in the isolator were discussed both by pressure measurement and the CFD calculation. The oscillations of shock train in a straight duct were experimentally investigated using high speed schlieren photography and wall pressure fluctuation measurements at eight measuring points along the isolator. The direction of the pressure fluctuation propagation and the main frequencies of the shock train oscillations were sought by the statistical analysis, such as the correlation and power spectrum analysis, try to find the reason of the oscillation. The preliminary conclusions as follow:The pressure fluctuation was a low frequency fluctuation which was below 40Hz and propagating downstream. The two main frequencies of the shock oscillation were 6Hz and 14Hz, and shocks composed the shock train oscillated almost simultaneously. The flow vibration in separated region induced by the first shock in shock train may be the reason of the shock train oscillation.

Related Dissertations

  1. Pattern Classification of Combustion Modes in Scramjet,V235
  2. Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
  3. Rubber isolator nonlinear theoretical modeling and experimental study of impact,TB535.1
  4. Based on polarization-independent optical superlattice device research,O437
  5. Regeneratively cooled scramjet engine start-up phase heat transfer characteristics of,V231.1
  6. Scramjet engine fuel supply system solutions research,V235
  7. Based cavity - strut flameholder supersonic combustor experiment and numerical simulation,V231.2
  8. Scramjet overall program design and optimization studies,V235
  9. Numerical Simulation of Flow Fields in a Ramjet Isolator with a Divergent Angle,V235.21
  10. Numerical Simulation on Three Dimensional Heat Transfer and Flow of Supercritical Hydrocarbon Fuel,TK124
  11. Investigation of Technique on Regenerative Cooled Scramjet,V235.21
  12. Development of Sma Semi-active Control Isolation Bearing and Its Analysis of Damping Effect,TU352.12
  13. Research on the Vibration Reduction of Dithered Laser Gyro Strapdown Attitude & Heading Measurement System,TN966
  14. Control-Oriented Study on One-Dimensional Modeling for Scramjet Engine,V235.21
  15. Research on Multi-Field Coupling Characteristics of Pneumatic High Temperature Flow-Rate Control Valve,TH138.52
  16. Dynamic Modeling and Self-converging Control of Electromagnetic Suspension Vibration Isolator,TB535.1
  17. Research on Steady-State Optimizing Control System of Scramjet Thrust,V235
  18. Multi-Field Coupling Thermodynamic Characteristics Analysis of a High Temperature Gaseous Fuel Flow Rate Control Valve,V231.1
  19. Experimental and Numerical Simulation of Flameholders in a Ramjet Combustor,V235.21
  20. Test Research on Impact Characteristics of Shock Isolator,U664.1
  21. Catastrophe Characteristics of Mode Transition in Scramjet,V235

CLC: > Aviation, aerospace > Aviation > Aero-engine ( propulsion system ) > Engine theory > Aero-engine gas mechanics
© 2012 www.DissertationTopic.Net  Mobile