Dissertation > Excellent graduate degree dissertation topics show

Study on Numerical Simulation of 3-D Thermal Stress Fields of Steel Castings during Solidification Process

Author: SunLiWen
Tutor: XuHong
School: University of North
Course: Materials Processing Engineering
Keywords: Casting Solidification Process Thermal Stress Fields Numerical Simulation ANSYS Residual Stress
CLC: TG244.3
Type: Master's thesis
Year: 2007
Downloads: 387
Quote: 7
Read: Download Dissertation

Abstract


The numerical simulation of thermal stress fields during casting process can help foundry engineers predict and analyze such defects as crack、deformation and residual stress, and present scientific reference to optimize casting process、control defects、guarantee the dimensional accuracy of castings and stability、get high quality production.In this thesis, the development of numerical simulation of thermal stress fields during casting process、the method of numerical calculation and the application trend of simulation software are summarized. According to the character of thermal、stress fields during casting process, built thermal elastic-plastic model and equation after solidification of casting process, analyze casting/mold boundary condition、the mechanics performance parameter of material during high temperature, and adopt indirect method calculate thermal stress.Select the FEM software—ANSYS, carry out the study on numerical simulation of thermal stress fields. Considering to the character that the material performance changes along with temperature, nonlinear analysis in the procedure is adopted. Based on the disposal principle of thermal physics performance of material、initial condition、boundary condition、latent heat during solving temperature fields, analyze and calculate stress of stress frame、hydraulic turbine vanes、goblet shell. The simulation results of stress frame are same with qualitative theoretical analysis. Using the characteristic of partition modeling, select one—eighth model of goblet shell, the results show that the position of stress concentration coincides with the facts. Adopting coarse grid and fine grid to calculate the residual stress of axial flow blades, the simulation results show that the position of stress concentration coincides with relevant reports. Study on the numerical simulation of thermal stress fields is research focus. In this thesis, adopt numerical simulation method to calculate the stress and strain. Offer a new method to simulate stress fields for CASTSoft software.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Study of Mechanism Using Two-Direction Pre-Stress to Control Welding Distortion and Hot Cracking,TG404
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  10. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  11. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  12. Numerical Simulation of Biomass Direct Reburning,TK16
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  20. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  21. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Casting process > Casting and solidification > Solidification , cooling
© 2012 www.DissertationTopic.Net  Mobile