Dissertation > Excellent graduate degree dissertation topics show

Research on Temperature-control Technology of Hydraulic Pump-Delivery-Concrete for Water Conservancy Structures in Jiangsu Province

Author: XiaGuoChun
Tutor: RenXuHua；DaiJingQiu
School: Hohai University
Course: Hydraulic Engineering
Keywords: pumping concrete temperature stress FEM crack temperature control measure
CLC: TV544
Type: Master's thesis
Year: 2007
Downloads: 71
Quote: 0
Read: Download Dissertation

Abstract


During last few years, application of pumping concrete into hydraulic construction has been more and more popular in Jiangsu Province. Pumping concrete brings convenience into construction, but bring more concrete cracks during construction, and some of these are serious, however, higher requirement of concrete exterior quality has been required in hydraulic construction. In such a context, a scientific research project——"Method to Prevent Pump-concreting for Water Conservancy Structures from Crack" has been set-up and funded by Jiangsu Provincial Water Conservancy Bureau, in order to modify the shortage of temperature control in design and construct, and reduce the possible of appearance of crack by special research in this fieldFrom the basic theory of temperature and temperature stress, the heat balance equation of unsteady temperature and finite element method based, systematic introduce temperature stress calculation method and the theoretical found of concrete cracks, focus on the theory of common anti-crack reinforcement rebar、pipe cooling、calculation of the temperature control of expansive concrete.In order to solve the difficulty in calculating temperature control, "Temperature Stress Analysis System for Pouring Block" has been developed on the base of these theories. The elaborate mathematics model has been applied in this software, which can simulate the whole process of concrete pouring block during construction, reveal the comprehensive relationship among those factors, and predict whether the cracks appeared. If the result can’t satisfy the request of anti-crack, optional measures of temperature control can be taken until the requirements are met.First, this thesis introduce how to calculate temperature control of some construction which had already used common adjustment(application of cooling pipe, reduce cement consumption, application of arch pier-wall) by this software. Then compute actual on-going construction, and adjust the construction scheme on the base of the computation result.Then, after sum up several results of usual pump concrete mix ratio in Jiangsu Province, the measures of temperature control during design and construction have been proposed.At last, the conclusion is——it is possible to satisfy the temperature control and reduce the appearance of crack by use of "system" to calculate and optimization scheme during the design period.

Related Dissertations

  1. Elastic-viscoplastic Analysis of the Asymptotic Stress Field Near the Tip of a Quasi-static Propagating Crack under Plane Stress Condition,O346.1
  2. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  3. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  4. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  5. Photosynthetic Apparatus Response to Heat Stress and the Mechanisms in Two Different Cotton with Various Leaf Colours,Q945.11
  6. Effects of Low Temperature Stress on Fatty Acid Composition and Content of Oreochromis Hornorum,S917.4
  7. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  8. Effects of Low Temperature Stress on Blood Physiological and Biochemical Indexes of Oreochromis Hornorum,S917.4
  9. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  10. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  11. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  12. Construction and Primary Analysis of Differentially Expressed cDNA Library of Alfalfa by Using Suppression Subtractive Hybridization under the High Temperature,S541.9
  13. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  14. Undersea robot plow trenching machine design and analysis,TE952
  15. A New Rail Crack Remote Monitoring System,U213.4
  16. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  17. Nonlinear Analysis of the Temperature and Shrinkage Stress of Super-long Reinforced Frame Concrete Structure and Design Measures Research,TU375.4
  18. Study on the Subsurface Crack of Supporting Roller Made of Austempered Ductile Iron,TG156.3
  19. The Effect of Low Temperature Stress on Fatty Acid of Cell Membrane in Alfalfa Crowns,S541.9
  20. Research Implementation of Crack Detection Method Based on Its Acoustic Property,TP274
  21. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43

CLC: > Industrial Technology > Hydraulic Engineering > Hydraulic engineering construction > A variety of engineering,types > Concrete and reinforced concrete works
© 2012 www.DissertationTopic.Net  Mobile