Dissertation > Excellent graduate degree dissertation topics show

Finite Element Analysis on Thermal Effect of Solid-state Laser

Author: WangDongLiang
Tutor: ShuBaiHong
School: National University of Defense Science and Technology
Course: Optical Engineering
Keywords: High-power solid-state laser Laser technique thermal effects finite element analysis
CLC: TN244
Type: Master's thesis
Year: 2006
Downloads: 308
Quote: 1
Read: Download Dissertation

Abstract


High-Power solid-state lasers are of major interest for applications in military, materials processing and science research, because of some advantages, such as high power scaling, high peak power, compact devices and the wavelength in the IR delivery through an optical fiber which is one of the major advantages of solid lasers. However it is difficult to design a high power laser with good beam quality, because there are thermal effects in the active medium. Thermal effects in the active medium are investigated systematically in this dissertation to improve the working characteristics of lasers, increase output power and improve beam quality.Geometry of active medium such as rod, slab and disc are familiar in solid-state laser. The thermal effects in the active medium are the most important factor to be considered in the laser design. In the paper, the temperature distribution and stress distribution is discussed. The main work is done with the ANSYS, a kind of finite element analysis software.There are six parts in the paper. The 1st part is introduction. The 2nd part is the basic theory of thermal effects. The 3rd to 5th part is the analyses of three shape of active medium. The last part give some advises and some insufficiencies in the paper. The active medium and the pump are analyzed and the origin of the thermal effects is opened out.We make conclusion on the whole study and prospect the following research on this study. In this paper, a good thought to resolve thermal effects of solid-state laser is mentioned, and a new idea to design a high-power solid-state laser with good beam quality is given.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  10. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  11. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  12. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  13. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  14. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  15. The Design of Telescopic Asphalt Spraying System,U415.524
  16. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  17. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  18. The Structure Design of 2000kN Servo Press for Hot Forming,TG385
  19. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  20. Simulation Analysis and Experimental Study on Hysteretic Behavior of High-performance Shear Panel Damper,TU352.1
  21. Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser materials and substances
© 2012 www.DissertationTopic.Net  Mobile