Dissertation > Excellent graduate degree dissertation topics show

A biodegradable thermosensitive hydrogel preparation and properties of

Author: WuNianQiang
Tutor: PanChunYue
School: Central South University
Course: Organic Chemistry
Keywords: Hydrogel Sodium alginate Thermo-sensitivity Degradation Release
CLC: TQ427
Type: Master's thesis
Year: 2007
Downloads: 208
Quote: 1
Read: Download Dissertation

Abstract


Thermo-sensitive hydrogels possess greater potential applications infields such as drug delivery, owing to their volume transition under lowercritical solution temperature （LCST）. However, they are notbiodegradable and then applications were limited. The multifunctionalmacromolecule poly（N-isopropylacrylamide-co-methylacrylate-co-hydrazide）（PNMH） was prepared and used to cross link oxidized sodiumalginate（OSA） to form biodegradable and thermo-sensitivegels（PNMH-OSA）. In addition, the thermo-sensitivity of PNMH andPNMH-OSA gels、degradation and drug releasing of PNMH-OSA gelswere studied in this article.The structure of PNMH and PNMH-OSA gel was characterized andanalyzed by infrared spectroscopy、LCRS, and so on. It was showed thatPNMH with crossing-linking groups-NHNH2 was synthesized byhydrazine partially substituting methoxymethane; OSA-PNMH hydrogelswere chemically crosslinked hydrogels which was formed by creatingC=N bonds between the -NH2 groups of side groups of PNMH and theavailable aldehyde of OSA. PNMH possessed thermo-sensitivity andLCST of PNMH solution went down with increasing concentration ofPNMH solution、decreasing NIPA、strengthening ion intensity、andshorter substituting time. OSA-PNMH hydrogels still showedthermo-sensitive property and thermo-sensitivity of hydrogels becameweaken with increasing the weight ratio of OSA and PNMH.The degradation of PNMH-OSA gel was due to break of C=N bonds.Experimental results showed that with increasing PNMH content, degradation time of gel became longer; OSA-PNMH hydrogel withweight ratio of OSA: PNMH=2: 8 could completely degradate at 25℃anddissolved faster than at 37℃, but the other hydrogels needed longer timeto degradate at 25℃than at 37℃; the higher degree of oxidation of SAand the lower degree of substitution of PNMH were, the shorter the timeof degradation was; the degradation of gel became difficult withincreasing quantity of MA monomer; in acid and alkali medium, hydrogel was easy to degradate; the degradation time of gel became longer whenstrengthening ion intensity and reducing water content of gel; thehydrogels with smaller slice or volume were easier to degradate.The Experimental results of drug releasing showed that the releaseof low molecule weight drug MB was controlled primarily by diffusing, but high molecule weight drug BSA was released through degradation ofgel mainly; the accumulative release of gels with weight ratio ofOSA: PNMH=6: 4 was close to that with weight ratio of OSA: PNMH=4: 6in the beginning, but that of gel with weight ratio of OSA: PNMH=6: 4was markedly higher than the gel with weight ratio of OSA: PNMH=4: 6subsequently; the accumulative release of gel at 37℃was higher than at25℃.

Related Dissertations

  1. Study on the Preparation of the Low Molecular Weight Fuciodan from Sargassum Henslowianum (C.Agardh) and Anti-tumor Activity,TS254.9
  2. Research on Liquidity Requirements and Efficiency in Large-value Payment Systems,TP301.6
  3. Preparation and Properties of Chitosan-based Thermosensitive Composite Hydrogel,R943
  4. Studies on the Preparation and Nutrient Release Characteristics of Low Molecular Weight Polylactic Acid Coated Urea,S145.6
  5. Orbital fat orbital Bow release lower eyelid blepharoplasty with conventional surgical rejuvenation effect is,R622
  6. The Preparation of Flurbiprofen-chitosan Hydrogel in Situ and Study on Intrawound Analgesia Effect Afterincisional Administration to Rats,R614
  7. Application of Glycol Chitosan-based Hydrogels in Tissue Engineering and Drug Delivery,R943
  8. Metro DC circuit breaker locomotive design,TM561
  9. Typical urban sewage degrading PPCPs Bacteria and Its Degradation Characteristics,X703
  10. BiVO 4 / bentonite Photocatalyst and Its Dyeing Wastewater Treatment,X791
  11. Electrochemical Treatment of pesticide intermediates ( phthalonitrile ) Wastewater,X786
  12. Containing disulfide bonds , glycosylation end trimethoxysilane polycaprolactone - polyethylene glycol block copolymer synthesis and properties of,O631.3
  13. NZVI/SBA-15 composite material synthesis and removal mechanisms of nitrobenzene in water,X703
  14. Degradation of dielectric barrier discharge combined with studies of gaseous benzene,O621.2
  15. Long-life products of degradation test methods,TB114.3
  16. Degradation of soil Ethametsulfuron Isolation and identification of fungi,S154.3
  17. The development of new coated slow-release fertilizer and its properties,S145.6
  18. Intelligent circuit breaker tripping dsPIC based design,TM561
  19. Functional polyacrylamide hydrogel Preparation and Properties,TB383.1
  20. Research on Evaluation Index System of Road Area Vegetation Degradation,S731.8
  21. Four -step braided composites under different stress levels bending fatigue behavior,TB332

CLC: > Industrial Technology > Chemical Industry > Reagents and the production of pure chemicals > Colloid and hemicolloid substances
© 2012 www.DissertationTopic.Net  Mobile