Dissertation > Excellent graduate degree dissertation topics show

Study on the Methods of Measurement and Profile Establishment of Ground Stress

Author: ShenHaiChao
Tutor: ChengYuanFang
School: China University of Petroleum
Course: Oil and Gas Well Engineering
Keywords: Ground stress Measurement methods Profile to establish Finite Element Method Oilfield Exploration and Development
CLC: TE271
Type: Master's thesis
Year: 2007
Downloads: 493
Quote: 3
Read: Download Dissertation


Ground stress is the exploration and development of oil and gas field , one of the important basic information for engineering design and construction of oil and gas wells . Situ stress measurement methods and cross-section of the establishment of the finite element method , the in-depth study . Common for indoor situ stress measurements difficult experimental problem , for the first time use of core velocity anisotropy characteristics , differential strain analysis method based on the establishment of a simple and feasible indoor situ stress measurement combination of measurement methods , namely main direction strain method , the method in the premise of ensure the accuracy of the measurement , reduce the difficulty of the experiment , so that the experiment is simple and feasible . At the same time , based on the status quo of the finite element simulation of the stress profile , explore the fault mechanics model to solve the finite element method can not be used to rock this discontinuous media ; combined with mathematical optimization theory , proposed a set of finite element constrained optimization inversion method, which improves the accuracy and efficiency of the work of the entire simulation . With this method , the distribution of ground stress field of Daqing Oilfield Block A case study of the block distribution of the stress profile . The research results show that the the fault their nearby places stress distribution has an important impact of the impact of the law are summarized . Finally , Block A , for example , from the crack distribution forecasts, casing damage prevention , the fracturing treatment program development and injection wells network layout situ stress in oilfield development brief discussion .

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  4. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  5. The Band Structure in 2D Resonant Phononic Crystal,O735
  6. The Software Development of Coaxiality Error Measuring Equipment Based on Non-diffracting Beam,TP391.41
  7. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  8. Numerical and Experimental Studies for Multi-Cracks of Asphalt Pavement with Semi-Rigid Basement Asphalt,U416.217
  9. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  10. Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
  11. Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33
  12. Scrap copper smelting furnace temperature measurement method,TF811
  13. Space hyperspectral imager Compensation focusing optical system of pre-,TH743
  14. Study of Composite Drive Shaft for an Automobile,U465.6
  15. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  16. Particle reinforced copper matrix composites mechanical behavior of finite element analysis,TB331
  17. Finite element analysis of gear transmission machine and Kinetics,TH132.41
  18. Large opening pressure vessel structural finite element analysis and strength design,TH49
  19. Composite cage rotor induction motor starting performance of the design and research,TM343
  20. More rarely slot reactance permanent magnet synchronous motor parameter calculation and research,TM341
  21. Magnetic induction tomography forward problem and reconstruction algorithm,TP391.41

CLC: > Industrial Technology > Oil and gas industry > Drilling engineering > Stem testing and commissioning of oil > Formation pressure detection
© 2012 www.DissertationTopic.Net  Mobile