Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Brittle Crack and Growth for Interface Edge of Bonded Materials

Author: ZhanChunXiao
Tutor: LiuYiHua
School: Hefei University of Technology
Course: Solid Mechanics
Keywords: interface edge stress distribution crack and propagation brittle fracture criterion numerical simulation
CLC: O346.11
Type: Master's thesis
Year: 2007
Downloads: 159
Quote: 0
Read: Download Dissertation


The effect of behavior of a dissimilar material bonded at the lower edge of a simple-supported beam and its bonded angle on the stress distribution near the interface edge is studied by FEM. The results show that the bonded angle and the behavior of the bonded material only affect the stress values, but have little effect on the stress distribution.According to the stress distributions of the interface edge, the maximum shear stress criterion is proposed. Then the crack and propagation for the interface edge are simulated numerically based on the maximum shear stress criterion and the maximum circumferential tensile stress criterion. The results show that the crack and propagation shall develop along the interface under the maximum shear stress, or develop in the direction perpendicular to the interface into the beam under the maximum circumferential tensile stress.It is helpful to reveal the rule of the crack and propagation for the interface edge, and the results are helpful to engineering repair.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Mathematical sciences and chemical > Mechanics > Solid Mechanics > Strength theory > Fracture theory > Brittle fracture
© 2012 www.DissertationTopic.Net  Mobile