Dissertation > Excellent graduate degree dissertation topics show

885nm Directly Pumped Nd: YAG Laser

Author: QuanHui
Tutor: LvYanFei
School: Changchun University of Science and Technology
Course: Optics
Keywords: LD pumped direct pumping indirect pumping thermal load Nd:YAG laser
CLC: TN248
Type: Master's thesis
Year: 2011
Downloads: 52
Quote: 0
Read: Download Dissertation

Abstract


In diode pumped Nd:YAG lasers, the quantum defect is the most important parameter determining the thermal load of the laser crystal. This can be reduced dramatically by direct pumping into the upper laser level. However, for the direct pumping, the absorption cross section of the Nd3+ ion is small in order to absorb adequate pumping power, high Nd3+ concentration is necessary. This requirement may bring some problems, such as concentration-dependent fluorescence quenching, variations of pumping and laser modes, etc, so Nd3+ concentration have a potent effect on direct-pumping. Therefore, the paper will make a deep study, the following is the main work and results:1.The principle and the effect on beam quality of the thermal load are analyzed. Introduce the reason of reduce the thermal load by direct pumping.2.Through the theoretical derivation and numerical calculation, we get the value of the slope efficiencies for incident and absorbed pumping powers as well as the incident and absorbed pumping thresholds of Nd3+:YAG laser under indirect and direct pumping with different Nd3+ concentration. Afterwards, the discrepancy between them is analyzed.3.Carry out an experiment with indirect(809nm) and direct(885nm) pumping Nd3+:YAG laser, the results of the experiment are practical unanimity with the theoretical derivation, therefore, in the case of the slope efficiency for the absorbed pumping power and the absorbed pumping threshold, the direct pumping is always better than the indirect pumping.

Related Dissertations

  1. Ceramic Theramal Sterss Cleaving Technology Based on Laser,TQ174.62
  2. Coupled Thermal and Mechanical Load Analysis in Diesel Engine Piston,TK423
  3. Calculation of Transient Heat Load for Aircraft Cabins,V223
  4. Performance Analysis of Hot Air Anti-icing System of Aeroengine Inlet Guide Vane of Complex Material,V233.94
  5. Equivalent Powers of P-GMA to 2 kW Nd: YAG Laser Power for Different Metals and Their Analyses by Numerical Simulation of Welding Temperature Fields,TG456.7
  6. Evaluate the Efficacy and Safety of Variable Pulse Width Frequency Doubled Nd: YAG Laser in the Treatment of Dermovascular Disease,R758.6
  7. In Vitro Evaluation of the Antibacterial Effectiveness of Nd: YAG Laser on Enterococcus Faecalis Within Root Canals,R781.05
  8. LD-Pumped 355nm Ultraviolet Laser of Continuous,TN248
  9. Research on Multi-Wavelength Solid-State Laser,TN248
  10. The Effect of Different Therapy of Desensitization on the Microscopic Characteristic of the Dentinal Surface and the Shear Bond Strength of Resin Cements,R783.1
  11. Study on LD Pumped Nd:GdVO4 MOPA Laser,TN248.1
  12. Theoretical Study of the Output Characteristics of LD Pumped Tm3+, Ho3+ Doped Fiber Laser,TN248
  13. Research on Key Techniques of Frequency Stabilization for Single-Frequency Nd:YAG Laser,TN248
  14. Study on Fracture Mechanical Behavior of Functionally Graded Materials under Thermo-Mechanical Loads,O346.1
  15. Research on the Heating System Load Forecasting Based on Neural Network,TM715
  16. The Design and Research of Solid-State Lasers with High Output Power,TN248
  17. A Combined 585NM Pulsed-dye Laser/1064nm ND:YAG Laser in Thetreatment of Acne,R758.733
  18. Experimental Research of the LD Pumped Slm Laser and Frequency Stability,TN248.22
  19. Calculation of the Cockpit,V223
  20. Research on Laser Characteristic of Neodymium Doped Inorganic Liquid Medium,TN248.3

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser
© 2012 www.DissertationTopic.Net  Mobile