Dissertation > Excellent graduate degree dissertation topics show

The High Peak Power Electro-Optic (E-O) Q-Switched 266nm UV Laser

Author: JiZuo
Tutor: JinGuangYong
School: Changchun University of Science and Technology
Course: Optics
Keywords: ultraviolet laser KDP crystal fourth harmonic generation high-peak power
CLC: TN248
Type: Master's thesis
Year: 2011
Downloads: 56
Quote: 0
Read: Download Dissertation

Abstract


266nm ultraviolet laser has widely used in industry, micro processing, photolithography and micro carved tchnology, high resolution spectroscopy, medicine, etc. In this dissertation, 266nm ultraviolet laser of the high peak power by electro-optic(E-O) Q-switched has been deeply studied from theory and experiment. The main contents are as follows,By octave efficiency formula, the effect of walk-off angle and crystal length on octave efficiency are analyzed. Phase matching angle, effective nonlinear coefficient and walk-off angle at 532nm octave 266nm using KDP and BBO crystals were calculated. Phase matching parameters of nonlinear optical crystal for fourth harmonic has been analyzed in contrast.Using KDP crystal for the extra-cavity fourth-harmonic generation, the high peak power 266nm UV laser is experimentally realized. Fundamental frequency laser is generated from an electro-optic(E-O) Q-switched Xenon lamp pumped Nd:YAG laser. KTP crystal and KDP crystal are respectively used for the extra-cavity second-harmonic generation and fourth-harmonic generation. Ultraviolet laser pulse energy of 34.9 mJ/pulse is achieved at the repetition rate of 1 Hz. And peak power of 4.3 MW. Ultraviolet laser single pulse energy of 28.9 mJ/pulse is achieved at the repetition rate of 10 Hz. Conversion efficiency of 532 nm to 266nm is 30%. BBO crystal are used for the extra-cavity fourth-harmonic generation Ultraviolet laser pulse energy of 31.2 mJ/pulse is achieved at the repetition rate of 1 Hz. For the experiment results of KDP crystal and BBO crystal, we has a comparative analysis.

Related Dissertations

  1. Fe ( 3 ) ions on the performance impact of KDP crystal,O734
  2. FDTD Analysis on Influence of Micro-Nano Surface on Near-Field Light Intensity Distribution in KDP Crystal,TG665
  3. The Characterization Study of Super Smooth Surface Based on Power Spectral Density,O76
  4. Experimental Study on the Deliquescent Polishing of KDP Crystals,O786
  5. KDP crystal nucleation evaporation Numerical simulation and experimental study,O781
  6. Lanthanum ions and of methylene blue doped KDP crystal growth and crystal quality,O782
  7. LD side-pumped all-solid-state 266nm quasi-continuous UV laser,TN248.1
  8. Additives on the KDP crystal growth and structural impact of research,O782
  9. Experimental study of the ceramic substrate laser processing technology,TN249
  10. 266nm Ultraviolet DPL for Microelectronics Processing,TN248
  11. Frustrated Total Internal Reflection Q-Switched Nd:YAG Laser,TN248
  12. Research of Theory and Experiment on Cutting Force of KDP Crystal in Ultra-Precision Machining,TG506
  13. Rapid growth of new crystal growth apparatus KDP crystal,O782
  14. Experimental Research of KDP Solution Stability and Crystal Growth,O782
  15. Study on the Techniques of Polishing KDP Crystal with MRF,TG669
  16. Studies of the Technologies in Femtosecond, High-intensity Laser System,TN24
  17. Study of Ultraviolet Laser on A则-Solid-State Nd:GdVO4-KBe2BO3F2,TN248
  18. Punctate seed growth KDP crystal defects study,TB34
  19. Study of Diode-pumped All-solid-state Deep Ultraviolet Laser at 213nm,TN248
  20. Research of the Effect of KDP Crystal Anisotropy on the Cutting Surface Roughness,TG506

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser
© 2012 www.DissertationTopic.Net  Mobile