Dissertation > Excellent graduate degree dissertation topics show

Fabrication and Ferroelectric Properties of BNT and BFO and BNT/BNT Composite Thin Films

Author: WangGuoYang
Tutor: TangMingHua
School: Xiangtan University
Course: Microelectronics and Solid State Electronics
Keywords: CSD BNT thin film BFO thin film composite thin film ferroelectric properties
CLC: TP333;O484.1
Type: Master's thesis
Year: 2011
Downloads: 21
Quote: 0
Read: Download Dissertation

Abstract


As a novel non-volatile random access memory, ferroelectric random access memory （FeRAM） has many advantages and application value compare with the traditional memories. Because ferroelectric thin film is the most important part of ferroelectric random access memory, fabrication high quality ferroelectric thin film is very important for the widely application of ferroelectric random access memory. In this thesis, we have successfully fabricated BNT (Bi3.15Nd0.85Ti3O12) thin films, BFO （BiFeO3） thin films and BNT/BFO Composite thin films on substrate of Pt（111）/Ti/SiO2/Si（100） by a chemical solution deposition technique （CSD）. We vary the condition of the fabrication, and the effect of annealing temperature, heating-up rate, doping, annealing atmosphere and interfacial effect were studied.After exam and analysis the crystal structures and electric properties of BNT thin films, we can conclude that: the surface of the BNT thin films are dense, smooth and well crystallized, the thickness of the film is about 360 nm; the best annealing temperature of the BNT thin films is 750 oC; in the process of the fabrication of BNT thin films, the heating-up rate can affects the orientation of the film grows and the quality of the film; the ferroelectric properties of the BNT thin films were found to be remarkably sensitive to the post-annealing treatment, which is because of the present of an interface layer between the film and the metal electrode.The BFO thin films fabricated by CSD were well crystallized, the surface of the BFO thin films are dense and smooth. We found that the BFO thin films can have a lower leakage density and better ferroelectric properties by doping, the sample films by doping La in A site have better electric properties than the sample films by doping La in A site and Mn in B site both. The samples annealing in the oxygen have better properties than the samples annealing in the air.We successfully fabricated BNT/BLFMO composite thin films on substrate of Pt（111）/Ti/SiO2/Si（100） by CSD. We found that fabricating composite thin films which the thickness ratio of BNT and BLFMO is appropriate can significant reduce the leakage density and improve the ferroelectric properties. When the thickness of the sample film is about 350 nm and the ratio of BNT and BLFMO is about 5:3, the leakage of the sample is about 10-3 A/cm2, and saturated hysteresis loop were observed, the remanent polarization value （2Pr） is 80.9μC/cm2 when the hysteresis loop is saturation.

Related Dissertations

  1. Preparation and Dielectric Properties of Ag-PST Composite Thin Film,TB383.2
  2. CSD Expression in Mouse Brain Cortex and Effects of Superior Ovarian Nerve Section on Reproductivity to Female Rats,Q42
  3. Studies on Preparation Technology and Electrical Properties of La and Mn Co-doped BiFeO3 Ferroelectric Thin Films,TM221
  4. Preparation and Properties of Multiferroic BiFeO3 Ceramics,TQ174.6
  5. Preparation and Characterization of Bi3.15Nd0.85Ti3O12 Nanostructures for Ferroelectric Memories,TB383.1
  6. Investigation of Doping on Bismuth Titanate Ceramics,TQ174.1
  7. A Study on TiO2-ZnO Composite Dye Sensitization Thin-film Solar Cell,TM914
  8. Preparation and Properties of SiO2 Based Organic-inorganic Composite Anticorrosive Coating,TG174.42
  9. Growth and Characterization of Terbium Molybdate Crystal,O782
  10. Synthesis and Properties of Thin Films for Hollow-core Fiber Application in Ultraviolet Laser Delivery,TN253
  11. Application Study of the Chemical Bond Method on Functional Inorganic Crystal,O742.1
  12. Study on Processing and Properties of Bismuth Layered Structure SrBi4Ti4O15 Piezoelectric Ceramics,TQ174
  13. Study on Fabrication, Structure and Properties of PZT5/Epoxy Resin 1-3 Composites,TB332
  14. Preparation and Electric Properties of NBT-KBT Lead-Free Pizoelectric Textured Ceramics,TQ174
  15. Modulation Recognition and High Dynamic Synchronization Based on Cyclic Spectral Density,TN761
  16. Preparation of Doped-PZT Thin Films and Its Microstructure and Ferroelectric Properties,TB383.2
  17. Preparation of electrospinning nanofibers multiferroic YMnO_3 and Characterization,TB383.1
  18. PZT thin film thermal annealing process research and preparation of micro- sensors,TP212
  19. Preparation of Ca0.4 Sr0.6 Bi4 Ti4 O15 Powder and Ca0.4 Sr0.6 Bi4 Ti4 O15 Thin Films Prepared by Powder-sol Method,TB34
  20. Two-step sintering method KNN Lead-free Piezoelectric Ceramics and Their Properties,TM282

CLC: > Mathematical sciences and chemical > Physics > Solid State Physics > Thin Film Physics > Film growth,structure and epitaxy
© 2012 www.DissertationTopic.Net  Mobile