Dissertation > Excellent graduate degree dissertation topics show

Overloaded forging manipulator gripping contact force and dynamic characteristics of

Author: QinQingHua
Tutor: LiQunMing
School: Central South University
Course: Mechanical Manufacturing and Automation
Keywords: heavy forging manipulator contact force performance indexes spring-damper system laser tracker dynamic characteristic
CLC: O342
Type: Master's thesis
Year: 2011
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


The forging manipulators are very important for the mechanization and automation in the forging process. The application of forging manipulators to achieve the flexible operation and the precise positioning, it is significant in improving productivity and reducing labor intensity. Stably and safely gripping work-piece during forging process is strongly required, and whether the gripper of a forging manipulator can achieve stable gripping depends mainly on the position and constraint pattern of contact points.After analyzing the characteristic of the grippers and the forcing principle of the tongs, the model of calculating contact forces is presented, and the contact forces are optimized by the via gradient flows with linearly constraint. The characteristics of position and contact forces in the process of gripping and operating are analyzed. By considering the dynamical characteristic of the sustaining contact, the contact force is equivalent to the force generated by spring-damper system. The dynamical contact forces and the characteristic of the work-piece are analyzed by the simulation and the experiments. The primary work and research results are as follows:(1)The calculating and optimizing model of contact forces is presented separately for the constrained tongs and under-constrained tongs, and the parameterized software for calculating contact forces is designed. Then, the contact forces and driving force are calculated for different tonnage forging manipulators. By comparing driving force in simulation with the experimental result of the prototype, it demonstrates that the modeling of contact forces is feasible.(2) The distribution of the contact points in the course of searching is discussed by using the performance indexes. The result demonstrates that the model of calculating and optimizing contact forces can give the perfect programming position.(3) The characteristic of contact forces is studied by simplifying the contact forces as the spring-damper system. The stability of the gripping and operating is analyzed in different driving forces, and the dynamical changes are studied from the simulation.(4) The real-time characteristic of operating work piece is measuring by using the laser tracker. Through analyzing the results of simulation and experiment, it is studied how the optimal gripping forces effect the stable gripping. These are significant for controlling the stable gripping of the forging manipulators.

Related Dissertations

  1. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  2. The Study on the Method of Structural Dynamic Modeling and Analysis of Wind Power Transformers,TM41
  3. FBG sensing structure, transfer characteristics and the contact force measurement,TP212.14
  4. Downhole drilling motor stator helical surface milling technology,TG54
  5. Keyway milling of ultrafine pole,TG54
  6. 126kV Vacuum Circuit Breaker Dynamic Simulation and Design,TM561.2
  7. Dynamic characteristics of the PIN diode Computer Simulation Analysis and Research,TN312.4
  8. Milling machine beams and hydraulic ram automatic balancing systems research,TG542
  9. 2D digital valve and the static and dynamic characteristics of nonlinear compensation deadband,TH137.52
  10. Resonant vibration load fatigue testing system model predictive control technology,TH87
  11. Based EMSCON multi laser tracker measurement key technology research collaboration,V262.42
  12. Dynamic Characteristic and Hardware-in-loop Simulation Research for Automobile Electric Power Steering System,U463.4
  13. Research on the Dynamic Characteristics of High Speed Solenoid Valve for ABS,U463.526
  14. Fatigue Life Analysis on Elastic Thin-Wall Component of Harmonic Gear Drive,TH132.46
  15. Experimental Modal Analysis of MGK7350 Surface Grinding Machine and Structure Improvement of Grinding Head,TG582
  16. Analysis of Static and Dynamic Characteristics of Ultra-Precision Hydrostatic Guideway and Indentification of Model Parameters,TG502.3
  17. Structural Dynamic Characteristic Analysis and Optimization of A 5-Axis Linkage NC Machining Center,TG659
  18. Dynamic Characteristic Analysis and Structural Modification of a Precise Horizontal NC Machining Center,TG659
  19. Modeling and Control System Design of Nonlinear Boiler Steam Temperature and Simulation Application,TM621.2
  20. Natural Characteristics and Dynamic Response of Mechanic Vibration System for Tractive Elevator,TU857
  21. Research on Dynamic Characteristic and Control of Electric Power Steering System for Vehicle,U463.4

CLC: > Mathematical sciences and chemical > Mechanics > Solid Mechanics > Structural Mechanics
© 2012 www.DissertationTopic.Net  Mobile