Dissertation > Excellent graduate degree dissertation topics show

The Effect of Heat Treatment on Microstructure and Performance of Ni-WC Coating Formed by Vacuum Fusion Sintering

Author: JinChangMing
Tutor: ChenShuJiang
School: Liaoning University of Science and Technology
Course: Materials Science
Keywords: Vacuum fusion sintering I-WC composite coating CeO2 heat treatment Microstructure property
CLC: TG156
Type: Master's thesis
Year: 2008
Downloads: 63
Quote: 2
Read: Download Dissertation

Abstract


Made Ni-base alloy tungsten Carbide composite coating with 1.0 percent CeO2 content and without CeO2 on 45 steel by the way of Vacuum fusion sintering. Then we disposed the samples with normalizing, quenching and tempering. After those hot treatments, first, we observed the coating’s microstructure by Optics Microscope （OM）,then observed and measured the histology of alloying-coating, diffusion horizon and matrix by Scanning Electron Microscope （SEM） and Energy-Dispersive Spectrometer （EDS）. After that, we also measured the samples’ hardness, wear-resisting property and bond strength by Rockwell hardometer, microhardness instrument, abrasion machine and fatigue testing machine. The results showed that:（1） Different heat treatments had little influence on the coatings, but it had much influence on the matrix. There was diffusion layer between the coating and matrix, which was a white light area, and heat treatments widened the diffusion layer.（2） Adding 1.0 percent CeO2 changed the shape and distribution of WC,WC became smaller and distributed uniformly, made it fused with nickel-base alloy better, this made the quality of coatings improved more.（3） Different heat treatments did little effect on the coatings’ surface hardness, but it improved the hardness of matrixes in a large scale. The coatings’ longitudinal microhardness assumed as "the mountain" shape distribution, the microhardness of the coatings with 1.0 percent CeO2 was higher than that without CeO2.（4） Different heat treatments almost had no influence on the bond strength between coatings and matrixes. But the bond strength of samples with 1.0 percent CeO2 was larger than that without CeO2.（5） Different heat treatments improved the wear resistance of the coatings and wear resistance of the coatings with 1.0 percent CeO2 was better than that without CeO2.

Related Dissertations

  1. Study on Key Technology and Its Physiological Basis of Virus Elimination and Rapid Propagation of Phalaenopsis,S682.31
  2. The Structure and Properties of Electronspun PSU Fibrous Membranes,TQ340.1
  3. The Research on Rolling and Heat Treatment Technology of AZ31 Magnesium Alloy Thin Sheet,TG166.4
  4. Effect of Mn, Pr, Sn, and Zr Doping on Ceria-Based Solid Electrolyte: A First-Principles Investigation,TM911.4
  5. Study on the Properties of PLA Filament and Its Mixed Fabrics,TS101.923
  6. The Study of Microstructure and Performance of La2 O3+CeO2-Ni-WC Composite Coating by Vacuum Fusion Sintering,TG174.44
  7. Reseach on Wear Resistance and Contact Fatigue Performance of Alloy Cast Steel for Roller,TG333.17
  8. Machining complex manufacturing systems - heat integrated scheduling method,TH186
  9. First-Principles Studies on CeO2 -Based Catalysts,O469
  10. Study on the Microstructure and Properties of 1Cr10NiMoW2VNbN Steel Used for Ultra-Supercritical Gas Turbine,TG142.1
  11. Preparation of W-10%Ti Alloys,TG146.23
  12. Study in the Technology of Microstructure Refinement in Hypereutectic High Boron Cast Steels,TG142.1
  13. Alloying elements on the Al-Zn-Mg-Cu alloy microstructure and properties of,TG146.21
  14. Effects of Composition and Heat Treatment on Microstructure and Properties of Fe-C-B Alloy,TG156
  15. Study on the Metabolic Characteristic of Physiological and Biochemical in Fresh-cut Carrot,TS255.3
  16. Study on Liquid Crystalline Properties and Fiber Forming Technology of Poly (p-Phenylene Terephthalamide) Solution,TQ340.6
  17. Adsorption and Oxidation of CO on the Highly Active Catalyst CU-CEO2 （111）: First Principles Study,O469
  18. Preparation of Ultrafine CeO2 CMP Slurry for Semiconductor,TN305.2
  19. Preparation and Properties of 2 composite airgel catalyst Ni (Co) / SiO ,O643.36
  20. Preparation of CuO-substrate Composite Oxide Catalysts and Their Catalytic Activities for CO Oxidation at Low Temperature,O643.36
  21. Wear Resistance of glass-ceramic composite plates,TQ171.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Heat treatment > Heat treatment process
© 2012 www.DissertationTopic.Net  Mobile