Dissertation > Excellent graduate degree dissertation topics show

Research on the Compaction Simulation of the Iron-based Powder

Author: SongPing
Tutor: JiaoMingHua
School: Hefei University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: iron-based powder compaction finite element simulation
CLC: TF124.31
Type: Master's thesis
Year: 2008
Downloads: 245
Quote: 2
Read: Download Dissertation


This thesis focused on the compaction process of powder metallurgy. The compaction process of the iron-based powder was simulated by using finite element based on MSC.Marc. The several major effects on the accuracy of compaction were also discussed.The compaction process of the iron-based powder forming process and its numerical simulation status were introducted. The difficulties in the numerical simulation were also analyzed. Through the comparison of several finite element analysis softwares, an appropriate software for simulation analysis was selected.The simulation model of the circular ring parts was built. A complete simulation process was built up. Some problems in simulation such as the boundary conditions, material properties, convergence capacity and so on were solved. The effects of the different compaction methods, the properties of the product were analyzed, which were used to improved the forming process. And it is beneficial to the actual forming process.The analysis results of the circular ring were used to the compaction forming of a gear. Considering the spring back of the gear, the gear mold shape was optimized.The established finite element models, the selection of the model parameters, contact model settings and the relevant conclusions in this thesis are good references for improving the PM forming process, optimizing mold design and improving the product quality.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  4. EDM Electrode Wear Mechanism and Control Research,TG661
  5. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  6. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  7. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  8. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  9. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  10. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  11. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  12. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  13. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  14. Numerical Simulation of Biomass Direct Reburning,TK16
  15. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  16. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  17. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  18. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  19. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  20. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  21. Power System Dynamic Voltage Stability Simulation Study Based on Precise Integration Method,TM712

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical Technology > Powder metallurgy (metal ceramic technology ) > Powder molding, sintering and post-processing > Molding process > Die repression
© 2012 www.DissertationTopic.Net  Mobile