Dissertation > Excellent graduate degree dissertation topics show

Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes

Author: ZhangYanXia
Tutor: DengZhengLong
School: Harbin Institute of Technology
Course: Control Science and Engineering
Keywords: Fiber optic gyroscope temperature drift relativity analysis model identification least square
CLC: V241.5
Type: Master's thesis
Year: 2008
Downloads: 156
Quote: 0
Read: Download Dissertation

Abstract


Fiber optic gyroscope (FOG) is a new type of angle-velocity transducer, with the merits of fast startup, wide dynamic range, small volume, light in weight and so on. They attract pubic attention widely since invented. With the deepening of the study, the request of the moderate highly-precision has been enhanced. But the kernel components are so sensitive to temperature that temperature becomes one of the most difficult problems for fiber-optic gyroscope to the entry into practical engineering.It compensates temperature drift of FOG by modeling thermally-induced error in this thesis. In this thesis, based on output of medium precision FOG, thermal factors which influence FOG drift are studied. Quantitative analysis and qualitative analysis are introduced and influences of temperature ramp and secondary ramp are made out. Finally the general temperature drift model is built. The model which has a uniform structure is based on subsection making use of temperature ramp and secondary ramp as of subsection basis, figuring out model factor according to least square method. The range of temperature experiments are between -40℃~+60℃. New data are used to validate the model. After compensation, the precision of FOG can achieve at 0.1°/h, increased by 50%. The model is proven to be viable and effective.

Related Dissertations

  1. Study on Attitude Determination Method of Distributed Moving Warship OTHR System,P228.4
  2. Realization of Fiber Optic Gyroscope Signal Processing Circuits Based on FPGA,V241.5
  3. The Method for Inertial Platform Testing and Parameter Identification,V249.322
  4. Simulation System of the Vehicle Experiment of the Inertial Platform and Research of Identification Method,TN966
  5. On-line Monitoring of Performance Targets and Optimization of Control Strategy for Limestone Wet Flue Gas Desulphurization,X701.3
  6. Experimental Research on Stress Electrical Spectrum Lines of H Shape Pillar under the Eccentrical Compression,TU392.1
  7. Design of Intelligent Solar Cell Test System,TM914.4
  8. The effectiveness of continuous competition reactor optimization approach and its application,TQ015
  9. Locking rail temperature monitoring node sensing unit design and implementation,TP274
  10. Cremaster support accelerometer error modeling and compensation of temperature,TH824.4
  11. Design, Modeling and Control Method Study of Precision Grinding Machine Control System,TM921.5
  12. Research and Realization on the Prediction System of Water Well Reserves,P641.7
  13. Study of Synchronous Generator Test and Its Transient Parameters Identification,TM31
  14. Model Identification of Lead-Acid Batteries Based on Adaptive Neuro-Fuzzy Inference System,TM912
  15. Research on Autonomous Navigation Technology for Missile Formation,V448.224
  16. Research of the Temperature Drift Compensation Method of Piezoresistive Pressure Sensor,TH812
  17. Research on Dynamic Modeling and Hydrodynamic Parameters Identification for AUV,TP242
  18. Based on the Analysis of the Satisfaction of Consumer Behavior IVR System Design and Implementation,TP274
  19. Design of VAR Multi-services Optical Transmission and Switching Integrated System,TN929.1
  20. Study and Application of the Local Geoid Refinement,P228.4

CLC: > Aviation, aerospace > Aviation > Aircraft instrumentation,avionics, flight control and navigation > Aircraft instrumentation,aerospace equipment > Gyro instrument
© 2012 www.DissertationTopic.Net  Mobile