Dissertation > Excellent graduate degree dissertation topics show

Research and Development of Supercritical, Ultra Supercritical Steel Blade in Benxi Steel

Author: YanJiJun
Tutor: ZhaoXianMing
School: Northeastern University
Course: Materials Engineering
Keywords: supercritical fluid Ultra-supercritical steel blade steam turbine
CLC: TG335
Type: Master's thesis
Year: 2009
Downloads: 55
Quote: 0
Read: Download Dissertation

Abstract


Supercritical, ultra supercritical steam turbine unit has a high thermal efficiency, low consumption, water consumption and low indicators. Compared with the sub-critical units, supercritical units to increase power generation efficiency of about 2-4%, ultra-supercritical power generation efficiency units can be increased by about 6%~7%.The development of ultra-supercritical units in the design and manufacture has many of the key technical issues to be resolved, the focus of future development of Ultra-supercritical emphasis in materials research and development and the temperature has increased. Supercritical units abroad early stages of development, high-temperature blade material is still used in traditional sub-critical unit leaf material. Benxi Steel starts researching from the fifties of the last century in China as early as the beginning of the turbine blade and bolt of steel production, the leaves gradually become China’s steel production and development base, is a turbine blade of the traditional advantages of steel production enterprises. The market share of steel blades is always stable at 80%.Benxi Steel R & D Ultra-supercritical supercritical carbon steel blade equivalent Siemens, GE, Hitachi and Toshiba’s advanced standards, design and control of the chemical constituents of a reasonable, uniform chemical composition, composition deviation small inclusions and the ferrite content is low, grain size small, low-quality good times, good mechanical properties, the indicators in line with technical standards, the level of overall quality of steel in the domestic leading level, reached the international advanced level, to replace imports to ensure that the "863" project, the state "use of the market for technology," a key construction project of the new export contracts of domestic leaf blade materials.In this paper, steel blades from the study of adverse environmental conditions start with the design of species composition of the various components of a comprehensive performance to consider the impact of performance requirements in accordance with smelting and reasonable control of Cr/C ratio, Nb/C ratio, the development of a reasonable scope of the standard components, combined with the variety of different technical quality, mechanical properties, the ferrite content of the request, work out the practical implementation of the control of the chemical composition to achieve the composition of the second design. By studying law with the return of Oxygen leaves ultra-low carbon steel smelting, and redissolving electroslag ingot production 3.0 tons, by the experiments of thermal processing technology to determine and optimize the design of the 800/650×4 mill pass system developed 3.0t large spindle-type electroslag ingot production supercritical, ultra supercritical new process steel blade; successful development of a mature and open fire blanks technology, the realization of a high alloy steel blade with rolled forging generation; study of a typical leaf of the internal quality of steel, Microstructure and mechanical properties of ferrite content and chemical composition and thermal history of the relationship; analysis of three typical steel blade defects, the process to develop the corresponding measures.

Related Dissertations

  1. Development of Turbine Rotor Dynamic Balance System,TH877
  2. Main Stream Temperature Control for Ultra-supercritical Units Based on Genetic Algorithm,TP273
  3. The Experimental and CFD Research of the Extraction System in Steam Turbines,TM621
  4. QFSN600MW grade water - hydrogen turbine ventilation cooling system,TM311
  5. The DEH’s Transformation and Optimizing of the Gas Turbine-steam Turbine Combine Cycle,TM621
  6. Adaptive Control for Once-through Boiler Turbine Coordinated System,TM621.6
  7. Research on Power System Low Frequency Oscillation Induced by Turbo-Power Changing,TM712
  8. Thermal Economic Performance Analysis and System Optimization of 600MW Power Unit,TM621.4
  9. Quantitative Study of Steam Turbine Unit’ Variable Load Optimal Operation,TM621
  10. Development of Rapid Design System for Turbine Generator Sets’ Rotor Coil,TM311
  11. 1000MW Ultra Supercritical Units in the Main Steam Temperature Control System’s Characteristics and Control Strategy Research,TM621.6
  12. Study on Chemicals of Citrus Peels and Extraction and Purification of Flavonoids from Them as Well,R284
  13. Vibration Analysis and Control of the Turbine Unit,TM621
  14. Study on Remote Fault Diagnosis System for Turbine Units,TM621
  15. Analysis and Research on the Character of Large Turbine Generator in Leading-phase Operation,TM311
  16. Vibration Fault Diagnosis of Large Steam Turbine Generator Based on Expert System,TM311
  17. Safety Analysis on Torsional Vibration of Large Steam Turbo-generator Shafts,TM311
  18. Study on Ultrasonic Non-destructive Evaluation for the Microstructure of Ultra-Supercritical (USC) Steel,TG142.11
  19. Energy Saving Research of Cold Source Field of Combined Heat and Power Unit,TM611.3
  20. Modeling and Simulation of the Thermal System in Uitra-supercritical Boiler Based on Numerical Simulation of Combustion Process,TK221
  21. Harmonic Parameters Identification Based on LpFFT and Order Analysis,TM711

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process
© 2012 www.DissertationTopic.Net  Mobile