About 1060 item dissertation in line with TG335,Rolling process query results,the following is 1 to 50(Search took 0.043 seconds)

  1. Study on Control of Interface Shape in Copper-Aluminum Composite Strip,Xie/Northeastern University,0/2
  2. Study on Surface State and Development of the Control Process of the Hot-Rolled Oxide Scale,XuRong/Northeastern University,0/14
  3. Study on Microstructure Evolution and Production Process of Low Cost C-Si-Mn-Cr Hot-rolled Dual-phase,LinJinYang/Northeastern University,0/3
  4. Using Roll Bonding and Annealing to Process Fe/Al Multi-layered Composites from Elemental Foils,DingMingMing/Northeastern University,0/2
  5. Study of Numerical Simulation on Roll Bonding Process of Titanium-7A52Aluminum Alloy Composite Sheets,WangMingZuo/Northeastern University,0/18
  6. Study on Microstructure and Mechanical Properties of700MPa Grade Cold-rolled Weathering Dual Phase Steel,WuJing/Northeastern University,0/9
  7. Study on Process, Tecture and Fish-scale-resistance of DC05EK Cold Rolled Ultra Low Carbon Enamel Sheet,YuanXiaoYun/Northeastern University,0/7
  8. The Optimization and the Application of the Plate Profile Model,LiHuiKai/Northeastern University,0/6
  9. Simulation Study on Deformation Regularity of Rough Rolling Process in Hot Strip Mill,ShiJinFang/Northeastern University,0/4
  10. The Research of Cold Rolled Strip Temperature with Liquid Nitrogen Cooling Condition,LvYongMing/Northeastern University,0/2
  11. Research and Development of Low Cost500~700MPa Hot Rolled Dual Phase Steel,LiChengNing/Northeastern University,0/6
  12. Temperature Modeling for Hot Strip Rolling Laminar Cooling System,GaoLe/Tianjin University,0/3
  13. Temperature Modeling for Plate Milling,LiShengZuo/Tianjin University,0/4
  14. Finite Element Simulation on the Recrystallization Controlled Rolling of V-N Micro-alloy Plate,RenSiZhe/Liaoning University of Science and Technology,0/35
  15. Research on the Forming Mechanism of the Plate Cross Wedge Rolling High-speed Rail Screw Spike,QiYong/Ningbo University,0/1
  16. Study on Forming Laws of Cross Wedge Rolling Asymmetric Shaft Parts Based on Parity Wedge,LiZhan/Ningbo University,0/2
  17. Study on Microstructure Rule of Hollow Railway Axle in Multi-wedge Synchrostep Cross Wedge Rolling,ZengXueLei/Ningbo University,0/1
  18. Research on Microstructure Evolution of Cross Wedge Rolling Asymmetric Shaft Parts and Non-remnants,GongWenZuo/Ningbo University,0/2
  19. Study on the Evolution Rule of Steel Plate Surface Scratches in the Rolling Process,HanYue/Liaoning University of Science and Technology,0/25
  20. Study on Temperature Field of Roll during Cold Strip Rolling,YuPeng/Liaoning University of Science and Technology,0/36
  21. Research on Simulation for geological drilling pipe diameter of 75 tube billet rolling,ChenZuo/Jiangxi University of Technology,0/8
  22. Modeling and Simulation and Control of Laminar Cooling System for Hot Strip Mill,QinQiang/Huazhong University of Science and Technology,0/13
  23. Study on the process of skew rolling forming integral fin tube micro grooved heat pipe,LiYiLong/Kunming University of Science and Technology,0/34
  24. Research on Deformation Resistance in Plate Straightening and the Calculation of the Straightening Force,LiChunGuang/Wuhan University of Science and Technology,0/38
  25. Simulation of Thermal Field in Laminar Flow Cooling of Plate,YinZuo/Wuhan University of Science and Technology,0/13
  26. Finite Element Simulation of Plate High-pressure Water Descaling,HuangFuZhou/Wuhan University of Science and Technology,0/20
  27. Research on Process and Microstructure of Electromagnetic and Ultrasonic Composite Energy-field Roll Casting1060Al Alloy Plate,ZhaoSuZuo/Central South University,0/12
  28. Effect of Electromagnetic/Ultrasonic Energy Field Cast-Rolling on Microstructure and Properties of AZ31B Magnesium Alloy Sheet,ZhangBiao/Central South University,0/13
  29. Effects of Si Addition on the Growth Behavior of Intermetallic Compound Layer at Aluminum/steel Rolling Interface,ChenZhi/Central South University,0/9
  30. Research of Rolling Technology A on SPA-H Steel Plate,ChenXiaoBo/Xi'an University of Architecture and Technology,0/16
  31. Study and Optimization on Strip Shape of Finish Mill in Xin Steel,ChenXingFu/Xi'an University of Architecture and Technology,0/7
  32. Research on Processing and Microstructure and Properties of Large Deformation Eutectoid Flat Wire Produced by Continuous Rolling,XiaoQiang/Xi'an University of Architecture and Technology,0/8
  33. FE Analysis the Cause of Color Aberration in Temper Rolling for IF Steel and Secondary Development,MuTianXiao/Wuhan University of Science and Technology,0/10
  34. Study on the Microstructure Evolution and Precipitation Behaviors during Hot Charging Process for HSLA Steel,LiJiang/Chongqing University,0/60
  35. Research on the Flow Resistance and Heat Transfer Characteristic of the Water-cooled Nozzle in the High-speed Wire Rod Rolling Process,LiuGuiChuan/Chongqing University,0/59
  36. Influence of Vertical Roll Shape on the Flow of Corner and Side Metal of Strip during Rough Rolling Process,WangZuoBing/Yanshan University,0/25
  37. Theoretical Research and Numerical Simulation on Rail Beam Blank Rolling,ZhangLong/Yanshan University,0/41
  38. Research on Precipitation and Microstructure of X80Pipeline Steel in Hot Rolling Process,ZuoHuanJuan/Yanshan University,0/91
  39. Research on Microstructure Inhomogeneity in Large Steel Bar during Continuous Rolling,LiNanShuai/Yanshan University,0/78
  40. The Theoretical Research of Three-dimensional Plasticflow in Rail Universal Rolling Process,ZhangJiangTao/Yanshan University,0/33
  41. Numerical Simulation and Impact Factor Analysis for Tapered Roller Cone-Type Piercing,ZhangBaoRen/Nanhua University,0/40
  42. Die Design and Simulation Research of Conical Slender Shafts by Shree-roll Cross Wedge Rolling,JiaZhanJiang/Yanshan University,0/24
  43. The Horizontal Vibration Mechanism and Experimental Research during Rhe Process of Hot Rolling,LiZuoZuo/Yanshan University,0/44
  44. Research on Numerical Simulation of Large Ring Rolling and Wide Spread Deformation,CuiDanDan/Yanshan University,0/83
  45. Coupling Thermo-mechancial and Microstructure Analysis of Super Diameter Shell in Hot Forming Process,XinWen/Yanshan University,0/55
  46. Study on Movement Trajectory and Parameter Optimization for Online Mould Width Adjustment Based on Hybrid Algorithm,YangYingMing/Northeastern University,0/0
  47. Finite Element Analysis of Phase Transformation during Laminar Cooling on Hot Strip Rolling,ChengJian/Wuhan University of Science and Technology,0/44
  48. Effect of Hot Rolling Reduction on Microstructure and Mechanical Properties in Hot Rolled High-strength Strip,YangJingJing/Wuhan University of Science and Technology,0/33
  49. Development of Radial-Axial Ring Rolling Experimental Test Equipment,TanYuLong/Jinan University,0/12
  50. Research on Influence of Guide Roll System to Stability of Ring Rolling,XuZengHai/Jinan University,0/16

Total 22 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile