Dissertation > Excellent graduate degree dissertation topics show

Research on Precipitation and Microstructure of X80Pipeline Steel in Hot Rolling Process

Author: ZuoHuanJuan
Tutor: PengYan
School: Yanshan University
Course: Mechanical Design and Theory
Keywords: X80pipeline steel precipitation grain refinement micro-alloy
CLC: TG335.11
Type: Master's thesis
Year: 2013
Downloads: 91
Quote: 0
Read: Download Dissertation


In recent decades, with the transport distance and pressure increasing, pipeline steelis developing to the high strength, high toughness, good weldability and corrosionresistance of high performance. X80pipeline steel is the preferred and important steel forpipeline transportation, grain refinement is the most effective way to improve the strengthand toughness. The main micro-alloy Nb and Ti in X80pipeline steel play an importantrole on enhancing the strength and toughness, combined with precipitation theory andcontrolled rolling technique to obtain high strength steels are important research fields.This paper takes X80pipeline steel containing Nb and Ti as the research object. Thestatic recrystallization behavior is investigated on Gleeble3500thermo-mechanicalsimulator. Discussing the stress relaxation curves at different deformation temperature anddrawing PTT curve to analysis the relationships between precipitation, temperature andtime of precipitation by stress relaxation experiment; The microstructure of hot deformedX80pipeline steel is observed by OM, SEM and TEM, the austenitic grains size atdifferent deformation temperature and different inter-pass time has been analyzed. Theacicular ferrite and M-A islands structure of X80have been studied. The precipitationmorphology have been observed.According to stress-strain curve under two-stage interrupted compression experiment,the static recrystallization softening rate and activation energy of X80pipeline steel havebeen calculated, the activation energy is486.5kJ/mol; The nose temperature is950℃obtained by PTT curve.The precipation theory and TEM observation show that TiNinhibits grain growth at high temperature,and Niobium carbonitride mainly precipates inthermal deformation process.The results shows that, by reasonably controlling deformation temperature andinter-pass time, the effect that Niobium and Titanium carbon inhibit austenite grain growthcould be enhanced, refined acicular ferrite and dispersively distributed M-A islandsstructure could be obtained, the strength and toughness could be improved greatly.

Related Dissertations

  1. Study on the Simulation of Agricultural Non-point Source Pollution in Huaihe River Basin in Henan Provice,X52
  2. Predicting Model of Coal Fired Fly Ash Resistivity,X701.2
  3. The Study of TWC Catalytic Removal NOx from Waste Incineration Flue Gas,O643.36
  4. Changchun High- temperature low-pressure ridge containing wax reservoir development and technological measures,TE349
  5. Synthesis, Conducting Properties and Applications of BaCe (1-x-y)ZrxSmy O3-α,TQ174.1
  6. The Relationship between Species Diversity and Productivity in Restoration Succession Process of Degradation Grazing Meadows in the Songnen Plain of China,S812
  7. GIS and SPSS-Based Study of Space-time Change of Climate in Three-river-source Area of Qilian Mountains,P467
  8. The Preliminary Research on Effects of Altered Precipitation on Grasshopper Behaviour in Songnen Grassland,S812.6
  9. New Grain Refiners and Their Refining Behaviors of AZ31 Magnesium Alloy,TG146.22
  10. Research on Microstructure and Properties and Process Development of V Micro-alloy Steel under Ultra-Fast Cooling,TG335
  11. Preparation and characterization of nanometer luminescent materials stannate,TB383.1
  12. High Speed ??Rail biological recovery of copper and copper leaching liquid iron Process,X703.1
  13. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  14. The Affect of Microstructure and Properties Adding ZrO_ 2 Nanoparticles on Carbon Steel,TG142.31
  15. Construction of H5N1 Vaccine and the Establishment of the Vaccine Production Process,S852.52
  16. The Applicability of the Global Sharing Precipitation Data in China,P337
  17. The Study on the Synthesis and Grain Refinement of Al-Ti-B-C Master Alloy,TG146.21
  18. Reconstruction and Analysis of the Dendroclimatology in the Middle and East of Altay Region,S718.4
  19. Supplemented by large deformation heat treatment asynchronous Roll Ultrafine twinned copper and its formation mechanism,TG166.2
  20. Magnetic field double wire submerged arc welding heat Numerical simulation and experimental study,TG445
  21. Wrought magnesium alloy microstructure and properties of thermomechanical treatment,TG146.22

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process > Rolling method > Hot-rolled
© 2012 www.DissertationTopic.Net  Mobile