Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation and Strength Analysis in Plug-in and Jet-stream Hot-wind Furnace

Author: HanLe
Tutor: ZhangZhenWei
School: Northeastern University
Course: Mechanical Design and Theory
Keywords: Hot-wind furnace Convection heat transfer Fluid field Temperature field
CLC: TF578
Type: Master's thesis
Year: 2010
Downloads: 22
Quote: 0
Read: Download Dissertation

Abstract


This study which is about the plug-in and jet-stream exchanger is the need to adapt to modern production in the traditional shell and tube heat exchanger which was developed on the basis of a new energy efficient heat exchanger. This article describes the plug-in and jet-stream furnace how to work, and associates heat transfer theory, fluid dynamics model. According to the characteristics of the corresponding it selects the appropriate mathematical model to make numerical simulation analysis and strength analysis.In this paper, with the numerical simulation software ANSYS12.0,it makes the furnace flow field and temperature field simulation. First create a finite element model of furnace, taking into account the study of the process and impact of external environment conditions, the model is part of a reasonable simplification. By the FLUENT analysis of the internal gas and air in the furnace, using the standard k-εturbulence model, obtained flow and temperature field distribution of the two kind of air in the furnace flow and temperature field distribution. Through different cut surfaces or height of cross-section of the flue gas, the air temperature, pressure, velocity analysis on the heat transfer model, combined with the structural characteristics of furnace, it describes the three processes of heat transfer process and the factors in the furnace at different angles.It simulated the temperature distribution of the plug-in and jet-stream furnace in the heat transfer model. Through the air and flue gas temperature distribution and velocity it shows various parts of furnace thermal stress and deformation, analyzed the temperature danger zone near the bottom of radiation tube and the exhaust pipe loading situation, and according to JB4732-1995-based analysis of pressure vessel design standards for the strength check, the results show that all strength criteria are meet.In this paper, numerical simulation, provides a new method of researching the furnace, is consistent with the actual situation of working conditions. Following the heat stress and flow field simulation in the furnace, for the future it provides a basis for optimization of the structure.

Related Dissertations

  1. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  4. Research of H-beam Steel after Ultra Fast Cooling,TG335.4
  5. The Study on the Vestibular 3d Reconstruction of Guinea Pig and the Numerical Simulation of Temperature Field,R764
  6. Analysis of the Thermal Lens Effect on Yb: YAG Thin-Disk Laser Crystal,TN248
  7. Research on Sheet Metal CNC Cutting 3D Simulation,TG48
  8. Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
  9. The Study of Complex Monitoring for Energy Transfer Based on Temperature Field Reconstruction,TU111
  10. Analysis of Rotor Temperature Field of Hydro Generator on Asymmetric Operation Condition,TM312
  11. Research on Temperature Control Feedback of Concrete Dam Based on Distributed Optical Fiber,TV698.1
  12. Study on Heat Transfer Performance of Double-Sided Radiant Cooling System,TU831.6
  13. Performance-Based Fire-Resistant Design Method for Long-span Steel Structure,TU352.5
  14. Reinforced Concrete Beam Flexural Capacity Theory in High Temperature,TU375
  15. Analysis of Temperature, Deformation and Stress Fields of Nuclear Waste Repository in Salt Rock,TL942
  16. The Analysis and Study of Leakage Magnetic Field and Temperature Field in Dry-Type Transformer,TM412
  17. Study on Assembly Variation Analysis for Thin-Wall Composite Aerostructures,TB332
  18. Experimental Study and Simulation of Temperature Field and Stress Field of Laser Surface Modification,TN249
  19. Numerical Analysis of the Heat-Flow Coupling for Rotor of Supercritical Steam Turbine,TK261
  20. Continuous hot dip galvanized strip stable transmission , heat transfer and organizational change behavior,TK124
  21. Mine -scale coal bed temperature distribution law of,TD727

CLC: > Industrial Technology > Metallurgical Industry > Ironmaking > Blast furnace (BF ) > Hot stove
© 2012 www.DissertationTopic.Net  Mobile