Dissertation > Excellent graduate degree dissertation topics show

Free Vibration and Overall Stability Analysis of the Rectangular Hard-sandwich Plate

Author: YangHe
Tutor: DengZongBai
School: Nanjing University of Aeronautics and Astronautics
Course: Engineering Mechanics
Keywords: rectangular sandwich board hard sandwich Hamilton principle freevibration overall stability finite element MATLAB
CLC: O327
Type: Master's thesis
Year: 2012
Downloads: 71
Quote: 0
Read: Download Dissertation

Abstract


Compared with the traditional structure, sandwich structure has higher strength and stiffness, good fatigue resistance, good seismic performance, insulate heat, insulate heat, etc. Can give full play to the superiority of the composite effects, and easy to design. Widely used in aerospace, transportation, buildings, etc. In the present research of the sandwich structure mainly based on the soft sandwich hypothesis, just linear theory mainly include:1. Reissner type theory;2. Hoff type theory;3. ⅡpycaKOB-DuQingHua type theory. But the entire sandwich layer is seen as soft sandwich in this three classic sandwich plate theories, ignore its in-plane stiffness and bending rigidity, namely the stress components in the sandwich layer are zero. But sandwich layer have large thickness relative to the surface, especially for sandwich layer with larger elastic modulus sandwich structure, the above three theories of soft sandwich hypothesis would have greater error. This article is to sandwich layer with larger elastic modulus sandwich structure, fixed the soft sandwich hypothesis of Reissner type theory and Hoff type theory, put forward the assumption of the hard sandwich interlayer board theory. Consider the sandwich layer’s in-plane stiffness and bending stiffness, namely the stress components in the sandwich layer are no longer for zero, get the following conclusion:1. Get the geometric equations and physical equations of hard-sandwich plate, established the basic equation of hard-sandwich plate free vibration and overall stability analysis by using Hamilton principle.2. Simplify the equation, got the analytical solution of some special boundary conditions. Change the sandwich layer’s elastic modulus, found that when the sandwich layer’s elastic modulus is greater one over ten than the surfaces’, hard sandwich hypothesis computing to the inherent frequency and critical load value than the results of soft sandwich hypothesis have increased significantly. In addition, we also calculated the other sandwich layer material parameters’effects on the sandwich board’s natural frequency and the overall instability.3. Based on the fixed Reissner type hard sandwich plate theory in this article, derived the stiffness matrix of the unit used the four nodes quadrilateral isoparametric unit. And based on MATLAB programming, solve the different boundary conditions hard sandwich rectangular interlayer board’s natural frequencies, the convergence of finite element solution by analytical solution.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. EDM Electrode Wear Mechanism and Control Research,TG661
  4. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  5. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  6. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  7. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  8. The Study on Structural Calculation and Analysis Method of Lattice-type Crane with Variable Cross-section Boom,TH21
  9. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  10. Application Research of Digital Image Processing on Container Inspection,TP274.4
  11. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  12. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  13. Design of Testing Equipment for Electronic Products,TN06
  14. S-lay Installation Analysis for Deepwater Pipeline,TE973
  15. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  16. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  17. The Research and Application of Software Reliability Test for User Right Management System,TP311.53
  18. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  19. Research and Application of Safety Assessment Method Based on Neural Network,X937
  20. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  21. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2

CLC: > Mathematical sciences and chemical > Mechanics > Vibration theory > Structural vibration
© 2012 www.DissertationTopic.Net  Mobile