Dissertation > Excellent graduate degree dissertation topics show

Research of Torque Effect on the Overall Stability of Cantilever I-section Steel Beam

Author: WuLei
Tutor: LiuGuiQiu
School: Hunan University
Course: Structural Engineering
Keywords: Cantilever beam Impact of Bending and torsion Overall stability Eccentric loading Finite element Coefficients
CLC: TU392.1
Type: Master's thesis
Year: 2013
Downloads: 36
Quote: 0
Read: Download Dissertation

Abstract


Steel is widely used because of its advantages of high strength, light weight,good mechanical properities and so on. But in actual engineering, the bearing of thesteel structure and steel members are often affected by the stability, and overallstability is one of the most important parts in stability. Many scholars at home andabroad have done a great deal of theoretical researches and experimental analysisabout the overall stability of steel beam, and great achievements have been achieved.Cantilever beam is often due to eccentric loading in practical engineering, the beam isunder the effect of bending as well as torsion. However, there are few studies on thestability of I-section steel beams in composite force of bending and torsion,“Code fordesign of steel structures”(GB50017-2003) of China doesn’t provide the designformula either. In order to solve this problem, I think it is necessary to put forward aclear and concise design formula.The thesis firstly used the traditional method to research the overall stability,then done theoretical analysis for I-section steel beam subjected to bending andtorsion,at last got equilibrium differential equation and the total potential energyequation.And then the thesis analyzed the overall stability of cantilever I-section steelbeam under the effect of simple bending、lateral load and eccentric lateral load. At lastdrawing lessons from overall stability calculation formula of “Cold-formed steelstandard”(GB50018-2002) of China, I introduced two coefficientsk yandk ωrelating tobending and torsion, so as to consider the overall stability of the steel beam under theimpact of bending and torsion.In order to get the coefficients relating to bending and torsion, the thesis used thegeneral finite element ANSYS to model and analyse two kinds of typical eccentricloads, analyzed the influence of the eccentric distance e, span l, the compressionflange width b on the coefficients. When data analysis was completed, the thesisapplied statistical software for data regression analysis and finally got the coefficientsexpressions. This formula can provide reference on the design of the overall stabilityof cantilever I-section steel beam under the impact of bending and torsion.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. Seismic Analysis of Three-Span Cantilever Beam Viaduct with Pounding Effects and Restrainers,U442.55
  3. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  4. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  5. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  6. Design of Testing Equipment for Electronic Products,TN06
  7. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  10. Research rotodyne cutting damage yuan formation mechanism of high-voltage driver,TJ811
  11. Numerical Simulation Analysis of Line Heat Forming Aiding by Electromagnetic Force,U671.3
  12. Study on Mechanical Property of Plug-pin Steel Tube Scaffold Platform,U673.3
  13. Electromagnetic Transformation Medium and the Effects of Microstructures,O441.6
  14. The Influence of Frame Structure Local Column Failure on Overall Performance,TU375.4
  15. Behavior of Installation and Seepage Law of Offshore Skirted Suction Foundation for Offshore Wind Turbines,P75
  16. Analysis of Nonlinear Finite Element with Opening Infill Wall Frame Structure,TU323.5
  17. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  18. Finite Element Modeling of Electrodynamic Vibrator and Design for Appending Table,TB534.2
  19. Study of Modal Characteristics of a Car Body-in-White,U463.82
  20. Study to Finite Element Discretization Method of Coupling of Velocity and Temperature Field of Workpiece,TG335.5
  21. Research of Deep Excavation Construction Process for Nearby Subway Section Action,TU753

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Various types of steel > Steel structure
© 2012 www.DissertationTopic.Net  Mobile