Dissertation > Excellent graduate degree dissertation topics show

Subsonic Jet Noise Test Platform Design and Flow Field Simulation

Author: ChaiHongSheng
Tutor: XieJunLong
School: Huazhong University of Science and Technology
Course: Power Engineering
Keywords: Jet Test Platform Modular Design Jet Flow Field Flow Field Simulation
CLC: O358
Type: Master's thesis
Year: 2012
Downloads: 35
Quote: 0
Read: Download Dissertation

Abstract


This subject is supported by the National Natural Science Foundation (50976044)，mainly studied jet noise problem. Jet noise is a common aerodynamic noise problem,closely related to daily life. The study of the problem has great theoretical and practicalsignificance.Based on a summary of the existing jet noise theory as well as the relevantexperiences of building jet noise test platforms, the dissertation designed and built a highquality subsonic jet noise test platform. First The overall program are Demonstrated.Also, the technical parameters and the Collocation requirements are given too. Second,adopted to the design principles, the dissertation made a detailed analysis of differentmodules of the test platform，Combined the CFD assistive technology with the3Dmodeling technology,the design of nozzle are very innovative. Finally, the design of theSubsonic jet noise test platform are finished.After the completion of the test platform, the dissertation inspect the test platform intwo aspects:jet flow field experiments, jet noise field.Among them, the jet flowfield experiments to ensure the relevant parameters (Manumber, pressure, etc.) to meetthe design requirements of the test platform. Jet flow field results are consistent with theoretical calculations; And the result of the jet noise field experimental show that thespectrum characteristics of subsonic jet noise changes with the difference of Ma number.The experimental results above indicate that: the jet noise test platform can meet thedesign requirement, and can be used to undertake thefollow-up study of jet noise.In addition, two-dimensional and three-dimensional simulation of subsonic jet flowfield are discussed in the dissertation too. Through the acquisition of twodimensional simulation result,the axis cross speed of the flow field and the dimensionlessvelocity model combining prove that the CFD simulation is very practical in jetsimulationg. The three-dimensional jet simulation mainly study the impact of different m-eshing methods of the jet flow field. Finally, the dissertation provide a suitablethree-dimensional meshing methods.This dissertation carry out some research on the jet noise problem. These researchmainly focus on three aspects: theoretical analysis, experimental verification andnumerical simulation, providing a reference program for future similar testplatform construction. In addition, the jet noise experimental data and simulation calcula- tion results presented in this dissertation aslo have a certain value.

Related Dissertations

  1. Design and Research of Display of LED Contral System Based on GPRS,TN873
  2. The Research of Modular Design Method for Ship,U662
  3. Theoretical Study and Simulation of Hydrocyclone Separator,TH237.5
  4. Study on Similarity Scale-up Model for Mixing Section of Two-Rotor Continuous Mixer,TQ330.43
  5. Modular Design and Implementation of Multi-Channel NAND Flash Controller,TP333
  6. Research on High Fidelity Simulation Test for Bag Filters CFD Design and Optimization,X701.2
  7. Powerful jet vortex spinning influencing factors and related technology research,TS104
  8. Based on permanent magnet synchronous gearless traction machine elevator saving drive and control system design and implementation,TP273
  9. Numerical Simulation on Submerged Abrasive Water Jet of the Straight-cone Nozzle,TG664
  10. A Prelimenery Investigation of the Design of Foreign Fiber Detection Device,TS117
  11. Simulation of Electric Field and Flow Field for the New 10KA Rare Earth Electrolysis Cell,TF845
  12. Prismatic Shaft Oil Pump Construction Design and Performance Analysis,TH38
  13. Research on Grid Intelligent Alarming,TM76
  14. Study on Low Pressure and Small Volume Water Hydraulics External Gear Pump,TH325
  15. Research on the Lifecycle Cost of Modular Product in Mass Customization,TB497
  16. Research and Design of Web-based Remote Calibration Platform,TH706
  17. Modular Design and Scheme Solving for a Type of High-end CNC Machining Center and Their Application,TG659
  18. Multi-channel power quality monitor online Design and Implementation,TM76
  19. Prism type compressor design and dynamic flow field simulation,TH45
  20. Electromechanical products green module partition Research and Application,TH122
  21. Linux-based distributed switch device virtualization technology research,TP393.05

CLC: > Mathematical sciences and chemical > Mechanics > Fluid Mechanics > Jet
© 2012 www.DissertationTopic.Net  Mobile