Dissertation > Excellent graduate degree dissertation topics show

Study on the Manufacture Technology of the Infrared Photonic Crystal Fibers

Author: QianYao
Tutor: ChenHeMing
School: Nanjing University of Posts and Telecommunications
Course: Optical Engineering
Keywords: infrared PCF manufacture errors control uniformity and stability
CLC: TN253
Type: Master's thesis
Year: 2013
Downloads: 119
Quote: 0
Read: Download Dissertation

Abstract


The infrared photonic crystal fiber(PCF) is mainly used in CO2laser energy transmitting insurgical operation and industry. But PCF’s structure is complicated, all the existing manufactureprocesses have certain degrees of shortage, the infrared PCF has many problems in the fabrication,so it is hard to be in the way of becoming practical.In this paper, impact of infrared PCF structure error to the properties casued by the fabricationprocess is analyzed, and how to control the fiber structure error to improve the properties isdiscussed, and the uniformity and stability of the drawing condition is considered. The result showsthat fine errors of the infrared PCF, such as the error of the air hole ratio and the error of the latticeconstant, have large influence on the properties of the fiber, and loss of the actual fabricationstructure increases to1.984dB/km, the loss of the actual structure can be reduced to0.01dB/kmafter increasing the clad air hole number. Under ideal drawing condition, through controlling thedrawing temperature T, feeding speed Ufand pulling speed Ud, the size of the hollow capillary canbe uniform. But during the drawing of the perform, extra negative pressure must be plused to offsetthe surface tension. The clad and core capillary need1050pa and300pa while Uf=2mm/min,Ud=15m/min, and T=1850°C. The negative pressure technology can be optimizated, the corecapillary’s duty ration can be properly reduced to0.39, then the negative pressure can be equal tothe clad layer and the core, and it will be easier to apply the negative pressure. On the uniformityand stability of the drawing condition, the impact of uniformity can be reduced by using insulationdevice or changing the initial air hole ratio, the impact of stability can be controlled throughmonitor device.

Related Dissertations

  1. K Company’s Improving Planning and Forecasting for the Reasonable Allocation of Inventory,F224
  2. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  3. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  4. Design and Application of Scope Anti-Shake System,TH743
  5. Design and Research on Stabilization Loop of Gyro Stabilized Pod Control System,V241.5
  6. Attitude Control of a Three-Axis Stabilized Satellite,V448.22
  7. Realization of Fiber Optic Gyroscope Signal Processing Circuits Based on FPGA,V241.5
  8. Design and Fault Diagnosis of the Coarse Pointing Control System in Satellite Laser Communication,V443.1
  9. Satellite Attitude Control Methods Using Only Magnetorquers,V448.222
  10. Robust Adaptive Control Algorithms Research for the System of Spacecraft Attitude Dynamics,V448.22
  11. Parametric Approach of Active Control Technology for Tailless Flying-Wing Aircraft,V249.1
  12. Attitude Control Law Design Based on Blended Lateral Jets and Aerodynamic Control,V249.1
  13. Attitude Determination and Finite Time Control Algorithms for a Satellite,V448.222
  14. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  15. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  16. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  17. The Inductive Load Based Vehicle Body Network Control System,U463.6
  18. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  19. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  20. Several Problems of Energy Saving Operation in Air Conditioning System of Large Scale Public Buildings,TU831.6
  21. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Optical waveguide and integrated optics > Fiber optic components
© 2012 www.DissertationTopic.Net  Mobile