Dissertation > Excellent graduate degree dissertation topics show

Development of On-line Measurement System for the Thickness of Glass

Author: SunFeng
Tutor: WangXiaoXu
School: Dalian University of Technology
Course: Optical Engineering
Keywords: Glass thickness Optical design Digital image processing
CLC: TN247
Type: Master's thesis
Year: 2013
Downloads: 40
Quote: 0
Read: Download Dissertation

Abstract


In field of the glass thickness measurement, the traditional manual offline measurement technique has been unable to meet production requirements. With the rapid development of industrial modernization, Domestic and foreign scholars have done a lot of research on dynamic non-contact measurement technology, among these the most popular is the method of photoelectric measuring.Currently, the use of optics thickness measurement methods are mainly reflection method and transmission method. This article on the basis of the reflection method, raise a new glass thickness measurement method.This article based linear laser characteristics, according to optical plane mirror imaging principle, through collecting the imaging of the light source in the upper and lower surfaces of the glass calculate glass thickness. The whole measuring system is composed of two parts by the optical system and a computer vision system, The optical system through building the optical path generate the optical information required for the measurement of the thickness of the glass. Computer vision systems using CCD convert the optical information through the lens into analog signal.Then,using image acquisition card transfer the collected image information to computer.Next, putting VC++as a development platform, complete the system image feature extraction, feature calculation, the speckle processing and the man-machine interface of the system. Finally,through building the experimental platform and debugging the system, to complete the online measurement of the thickness of the glass. Currently, the measurement precision of the glass thickness up to0.01mm, and the measurement error in the national standard deviation the allowable rangeThe research of glass thickness measurement technology is a meaningful problem, The use of laser, CCD and digital image processing techniques to measure contains a series of advantages including dynamic non-contact, simple operation, easy computer processing. In the same time, the glass thickness measurement techniques based on the principle of a plane mirror imaging present in this paper further to overcome the glass surface defect spots on the measurement results. Therefore, this research project glass thickness measurement system has great practical significance and practical value.

Related Dissertations

  1. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  2. Research on Visual Servo System of Mechanical ARM,TP242.6
  3. Application Research of Digital Image Processing on Container Inspection,TP274.4
  4. Flow Behavior Description of Two-Phase Flow Based on Image Processing Techniques,TP391.41
  5. Design of an Athermalized MWIR and LWIR Dual-band Optical System,TN21
  6. The Research for Small-sized Reflecting/Catadioptric Telescope,O439
  7. 3D Body Measurement Systems of the Apparel Based on Incomplete Data,TP391.41
  8. Design of a Zoom Beam Expanding System for Laser,TN24
  9. Research on Automatic Identification and Location DNA Fingerprinting Gel,TP391.41
  10. The Developing of Cotton "Three Wire" Automatic Removing System Based on CCD Detection Technology,TP391.41
  11. An Optical Design of Interior LED Spotlights Used by a Fresnel Lens,TM923.34
  12. The Study of Coal Calorific Capacity Based on Texture Feature,TP391.41
  13. System Designing to Analysis the Real-time Density of Group-control Elevator Passengers Flow,TP391.41
  14. The Gray Image Processes Techology of Sediment Core and Its Application on the High Resolution Sediment Record in Inner Shelf of the East China Sea,P736.21
  15. HD bayonet Huzhou Public Security Monitoring System Design and Implementation,TP277
  16. Preliminary Research on Optical Microscopy for Big Solid Biologic Specimen,Q-336
  17. Study of the Evaluation on the Homogeneity of Dielectric Barrier Discharges Basing on Digital Image Processing Technology,TP391.41
  18. Software Development of Tunnel Deformation Monitoring Based on Digital Image Processing,TP391.41
  19. Study on Displacement Monitoring System for Tunnel Vault Based on Digital Image Processing,TP391.41
  20. Analysis on the Surface Structure of ACF Micro-Image,TP391.41
  21. Study on High Power Nd:YAG Laser Scanning Galvanometer System,TN249

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Optical detection techniques
© 2012 www.DissertationTopic.Net  Mobile