Dissertation > Excellent graduate degree dissertation topics show

Research on Modification and Molding Conditions of the Catalysts for Xylene Isomerization

Author: NingMingCai
Tutor: LiJianWei
School: Beijing University of Chemical Technology
Course: Chemical Engineering and Technology
Keywords: HZSM-5 xylene isomerization metal modification molding condition
CLC: TQ426
Type: Master's thesis
Year: 2013
Downloads: 18
Quote: 0
Read: Download Dissertation

Abstract


In this paper, HZSM-5with SiO2/Al2O3ratio120was synthesized by hydrothermal method. The zeolite was modified and formed with a series of steps to improve its catalytic ability.Using salt solution of Me(Me=La, Ce, Ni, Co, Zn,Sn) as modifier, single metal modified catalysts were prepared by impregnation method. Their catalytic performance was evaluated and they were characterizated by XRD、XPS、BET、NH3-TPD and Py-FTIR.Finding out that La/HZSM-5gain high PX yield, while Zn/HZSM-5can improve selectivity of the target product. Zn/HZSM-5with0.5%loadings show better performance in its series. Based on experimental results of single metal modification,La-Zn, Ga-Zn bimetallic catalysts were investigated. The evaluation of bimetallic modified catalyst result shows that1%La-0.5%Zn/HZSM-5and1%Ga-1%Zn/HZSM-5showed a relative better m-xylene isomerization performance. Characterization shows that metal modification doesn’t change the structure of zeolite, it optimizes zeolite’s acid distribution. B/L vaule decreases and so does pore size.During molding process, the effect of additives (extrusion promoter, peptizators, hole-expanding agent etc) to zeolite physical properties in the reaction were investigated by single factor experiments.(1) Extrusion promoter and adhesive have little effect on the catalytic performance. Activity is higher when nitrite used as peptizator, its suitable amount is8%. PEG200showed up better catalytic performance while used as hole-expanding agent. Activity becomes higher with its amount15%.(2) Using8%nitric acid as peptizators the catalyst can have good strength; Increasing SB powder help to improve the forming strength; Increasing PEG200as hole-expanding agent is unfavourable for strength.(3) Hole-expanding agent help to promote pore structure,pore size increases with molecular weight while choosing it. Using inorganic acid as peptizator have more aicd when forming; the total acid content increases with PEG200and nitrate.(4) The suitable molding condition is:water powder rotio=0.5g/ml, sesbania powder2.5%, nitrate8%, SB powder30%,PEG20010%.

Related Dissertations

  1. Synthesis and Modification of SAPO-34 Molecular Sieve Catalyst for Methanol-to-Olefin Reaction,TQ221.2
  2. The Modifications of Mo/HZSM-5 Catalysts and Methane Dehydro-Aromatization in the Absence of Oxygen,O643.32
  3. Experimental Study of the hydrogenation of carbon dioxide slurry bed step synthesis of dimethyl ether,TQ223.24
  4. TNU-9 zeolite catalyzed direct hydration of cyclohexene preparation of cyclohexanol,TQ233.1
  5. Studies on Catalysts and Technology for Catalytic Dehydration of Ethanol to Ethylene and Aromatics,TQ241
  6. Studies on SiO2-deposited HZSM-5 Catalysts for Catalytic Cracking of C4 Olefins,O643.32
  7. Supercritical Catalytic Cracking of N-Dodecane on HZSM-5 and Y Zeolites,O643.32
  8. Catalytic Performance of HZSM-5 Modified by Mn/Fe-Mn for the NH3-SCR,O643.32
  9. CO_2 hydrogenation an synthesis of dimethyl ether Cu-Zn/HZSM-5 catalyst the modified research,TQ223.24
  10. Preparation and activity of the bifunctional catalyst in the hydrogenation of carbon dioxide in the direct synthesis of dimethyl ether,TQ223.24
  11. Investigation on HPW Modified Catalyzer Development and Technical Optimization for Ethylene Preparation Catalyzed in Fluid Bed Dehydration of Bioethanol,TQ221.211
  12. The Synthesis of Ethylbenzene by Alkylation of Benzene with Bromoethane,TQ241.1
  13. Studies on HZSM-5 Zeolite Catalysts for Desulfurization and Denitrification,X701.3
  14. Effect of P-H2O2 Treatment on Catalytic Performance of ZSM-5 Zeolite for Hydration of Cyclohexene,TQ233.1
  15. Theoretical Study on the Vibrational Spectrum and Reaction Mechanism of Isomerization of Chlorotoluene,O621.25
  16. Effect of Organic Solvent on the Activity of Cyclohexene Hydration,O643.32
  17. The Modeling and Dynamic Simulation of the Xylene Isomerization Reacter,TQ241.13
  18. Hydrogenation-Esterification of Aldehyde and Acid to Ester by One-Step Heterogeneous Catalysis,TQ225.1
  19. Synthesis, Characterization and Catalytic Performance of MCM-41-Type Composite Materials,O643.36
  20. An Investigation of CH3Br Catalytic Dehydrobromination to Prepare Higher Hydrocarbons,TQ221.2
  21. Study on Separating Thiophene from Coking Benzene by Friedel-Crafts Acylation Reaction,TQ241.11

CLC: > Industrial Technology > Chemical Industry > Reagents and the production of pure chemicals > Catalyst ( catalyst )
© 2012 www.DissertationTopic.Net  Mobile