Dissertation > Excellent graduate degree dissertation topics show

Effect on Aluminum Alloy Properties Processed by Chemical Milling in Li-ion Dissolved Chemical Milling Fluid

Author: FengYueJiao
Tutor: WangJiJie
School:
Course: Materials Science
Keywords: aluminum alloy Li-ion Dissolved Chemical Milling Fluid microscopic structure tensile property
CLC: TG172
Type: Master's thesis
Year: 2013
Downloads: 27
Quote: 0
Read: Download Dissertation

Abstract


Chemical Milling is a kind of processing technique by exposing themetallic parts to the chemical medium and corroding the part needingprocessing. The needed size and accuracy of the part can be obtained bycorroding the pre-defined region. Chemical milling process is with theadvantage of without tool, no chip and residual cutting stress. Therefore,it can be used to process special thin, easy-deforming and large-areacomponent, and aluminum alloy chemical milling is an important andindispensable technology in modern aircraft and weapon equipmentdevelopment.Sodium hydroxide solution was used for chemical milling ofaluminum lithium alloy uses the。This experiment has been configuratedordinary milling fluid, milling fluid of containing lithium-ion，then the2024and7075two ordinary aluminum alloy process chemical milling intwo different chemical milling fluid that is on the same experimentcondition。 Microstructure of matrix materials, ordinary chemical milledmaterials and Li-ion containing chemical milled materials of the twokinds of aluminum alloy was observed by metallographic microscope.Miniature electronic tensile machine was used for the contrast of tensileproperties for the three conditions of the two kinds of aluminum alloy.Spectrum analyzer was used for the lithium element composition analysisand measurement.The experiment results show that the surface roughness reducedafter milling, Chemical milling affect the microstructure and properties ofthe alloy. Tensile curve of2024aluminum alloy did not change greatlybefore milling. However, it changed obviously for the7075alloy afterchemical milling, and the yield strength decreases. After lithium-ioncontaining chemistry milling the yield strength slightly increases and theplasticity decreases. The fatigue property of the Al alloys deduces insome extent after chemical milling processing. The spectrum analyzermeasurement showed that treated by lithium-ion containing chemistry milling, lithium-ion diffused into the inside of the alloys and makeslithium density increases. Li element strengthen the alloy.

Related Dissertations

  1. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  2. Investigate of Chromate Conversion Coatings on Aluminum Alloy,TG174.4
  3. Surface Modification of Al-alloy for Improving Bonding Strength with Pps and the Corrosion Resistance of Al-alloy,TG174.4
  4. Studying on Dual-Ingot Low Frequency Electromagnetic Semi-Continuous Casting,TG292
  5. Experimental Study on the Belt Grinding Mechanism for Aluminum Alloys,TG580.6
  6. Model of Formation Enthalpy for Binary System and Its Application to Thermodynamic Calculation of Aluminum Alloy,TG111.3
  7. Trait Performance and Correlations of Different Tomato Strains Cultivated in Open Field and Plastic Tunnel,S641.2
  8. Constitutive Model and Numerical Simulation of Semi-solid Forming Technology in Aluminum Alloy,TG249.9
  9. Process Research on Fiber Laser-MIG Hybrid Welding Medium Thickness Aluminum,TG456.7
  10. Research on Microstructures and Properties of Modified A356 Aluminum Alloy in Lost Foam Casting Process,TG249.5
  11. Research on Formation Factors and Performance of Wear-resistant Coatings for Aluminum,TG174.4
  12. Optimization of Multi-directional Precision Forging for High Strength Aluminum Alloy Casing,TG316
  13. Study on Fiber Laser Welding of Aluminum Alloy with Filler Wire,TG456.7
  14. Mechanism Research of Resistance Spot Welding Process Between Automotive Steel and Aluminum,TG453.9
  15. Study of High Power CO2 Laser Welding Technique on T-Lap Joint of 5083 Alumium Alloy,TG456.7
  16. Study on Hdrogen Degassing Effect of Ultrasonic Vibration on Both Liquid Melt and Semi-solid Slurry of Al Alloy,TG292
  17. Preparation of semi-solid ramp hypereutectic Al-Si Alloys Research,TG249.9
  18. Multi-directional forging heat treatment on microstructure and properties of 7A04 aluminum impact,TG319
  19. Fabrication and Mechanical Properties of Pyramidal Lattice Truss Sandwich Structures of Aluminium Alloy,TB383.4
  20. Study on Mechanical Properties of Multi-axial Carbon Warp-Knitted Reinforced Composite Materials with Glass-fiber Binder Yarn,TB332
  21. Studies of Ultrasonic Casting Power Based on the Dynamic Matching of Neural Network,TG23

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Various types of metal corrosion
© 2012 www.DissertationTopic.Net  Mobile