Dissertation > Excellent graduate degree dissertation topics show

Research of Surface Modeling of Roller and Forming Mechanism of Two Grooves Skewing Rolling Steel Ball

Author: LiuYongQing
Tutor: RenXiaoZhong
School: Henan University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: Skew Rolling of Spiral Hole Steel Ball Finite Element Modeling Orthogonal Experiment
CLC: TG335.1
Type: Master's thesis
Year: 2012
Downloads: 72
Quote: 0
Read: Download Dissertation

Abstract


The skew rolling is one part of the advanced manufacturing technology. It hasadvantages of high productivity, high material utilization rate, high product quality andlow cost, etc, compared with the traditional production process of steel ball. The skewrolling is the preferred method of production of steel ball. At present, the main factorsthat restrict promotion and development of skew rolling are Mannesmann destructioninside the ball and the complexity of forming regularity of ball. The paper conducts theresearch mainly in surface modeling of roller and forming process simulation of skewrolling ball and parameter optimization. The purpose is to get the law of deformation,the flow of metal and improve the internal quality of steel ball. The main researchcontents of the paper are shown as following:1. Modeling design of double-thread roller according to the diameter of ball and themethod of design of single-thread roller. The modeling design mainly contents thedesign of spiral pass on the surface of roller and the size of roller. The design of spiralpass on the surface of roller mainly contents radius of groove, length of groove, heightof convex edge, width of convex edge, helix angle of roll, etc. These parameters willdirectly affect the rolling process and the quality of steel ball. The design of size ofroller contents the diameter and length of roller and the design of bite section. Thepurpose of design is to make the bar biting more smoothly, the deformation andstress of ball more reasonable, the deformation and force of metal more reasonable,and then improve the internal quality of ball.2.Obtaining the reasonable value of parameters by the method of gradually thinningscreening with finite element simulation software. In the condition that otherparameters remain unchanged, simulating the change of the ball’s internal stress andstrain with different cross angle using the finite element simulation software DEFORM.And analyses the law of effect on internal stress and strain by the cross angle, then thereasonable cross angle can be obtained.3. Using DEFORM to simulate and analyze the internal stress condition and the quality of ball in the condition that only the rotational speed is changed, then the stressof ball, the flow velocity of metal, the deformation of metal and the effect of rotationalspeed on ball quality can be obtained.4. Analyzing the size of influence of the main rolling parameters on internal stress ofsteel ball with the method of orthogonal experiment. And the best factor combinationcan be obtained and the best factor combination is verified, then the internal stress ofball is reduced greatly. The results provide theoretical basis for solving problem ofball’s internal quality in actual production.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  3. Guide the process of deceleration spin dynamics analysis sensitivity Projectile,TJ410
  4. Study on Dust Collector Based on Vortex Principal Through Numerical Simulation and Orthogonal Experiment,X701.2
  5. Research on Experiment of the Effect of Dynamic Pressure on the Hydraulic Properties of Drip Emitters,S277.95
  6. Reserch on the Simulation and Optimization of Self-Piercing Riveting Process for Dissimilar Materials,U466
  7. The Build of the Dynamic Milling Force Model Based on Cutting Graphics,TG54
  8. Application of Data Mining in the Preparation of the Ceramic Coating,TG174.453
  9. H13 steel carbide ball of process and organization mechanical properties,TG142.15
  10. High purity GCr15 bearing steel microstructure evolution and control process,TG142.11
  11. Purifieation and SePeration of Phytosterol from DeodoriZer Distillats of Cotton Seed Oiland Its Funetion Study,TQ645.98
  12. Study on Preparation and the Properties of Duplex Ni-P/Ni-B Layer,TG174.4
  13. Finite Element Simulation of Cold Forging Steel Ball Billet,TG316
  14. Study on Seasonal Energy Efficiency Ratio of Residential Building,TU831
  15. Study on Extraction and Separation Technology of Resveratrol and Anthraquinone from Polygonum Cuspidatum Sieb.et Zucc.,S567.239
  16. Optimization and Evaluation of Type Ⅱ Diabetes in C57BL/6J Mice,R587.1
  17. The Morphology Evolution of Injection Molded IPP Parts,TQ325.14
  18. Study of Nano Epoxy Composite Coatings on Transmission Towers,TM754
  19. Research on Cold Heading Plastic Working Optimization in Bearing Steel Ball,TG316
  20. Study on the Extracting Technology of Polygonatum Polysaccharides and Preparation of the Polygonatum Sibiricum Yoghurt,TQ461
  21. The Study on Allelopathy under Nutritional Stress of Macronutrient Element in Watermelon(Citrullus Lanatus),S651

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process > Rolling method
© 2012 www.DissertationTopic.Net  Mobile