Dissertation > Excellent graduate degree dissertation topics show

Dynamic Analysis and Simulation of Feeding System of Precision Machine of Boring and Milling

Author: XuKai
Tutor: YinZhiHong
School: Kunming University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: NC machine tool the feeding system of table dynamic model modularstructure Simulink
CLC: TG536
Type: Master's thesis
Year: 2012
Downloads: 214
Quote: 0
Read: Download Dissertation

Abstract


NC machine tool is the fundamental equipment of the modern manufacturing. With the development of manufacturing technology towards to high speed and high precision, NC machine tool is demanded for having higher requirements of machining accuracy and faster movements of precision so as to reduce processing program and improve the efficiency of the machining. Therefore, the high requirements about NC machine are put forward in the speed, accuracy, stiffness etc. The numerical control feeding system is one of the important links of the numerical control machine processing, so the performance of the feeding system greatly influences the precision of the machine. Now, studying feeding system is one of the important topics in numerical control machine.This dissertation selects the feeding system of the gantry boring and milling machine as the research object in accordance with the concept of the modular design. From the point of view of modular structure, feeding system is classified into the drive motor module, mechanical transmission device module and supporting module of table guide system and so on. Then, the characteristics of the module are also detailed introduced. The nonlinear friction, nonlinear clearance and other influential factors of the feeding system which exist in mechanical transmission of NC machine tool were in-depth studied. Also the mathematical models of the factors were established.The milling force generated in machining influences work table in many ways. In this dissertation, the model of table system under the condition of milling forces is established by using Lagrange method. Moreover, micro dynamic differential equations of table are also established. Then the equation is transferred into the state space model and the position deflection of the table solved through the establishment of the Simulink block diagram. The comprehensive mathematical model including nonlinear friction, nonlinear clearance of feeding system of work table is put forward. In consideration of the traditional PID control parameters is not easy to achieve, coordinating parameters is adopted about the tri-cyclic structure of the servo control system by using ITAE performance index combining numerical optimization function of Simulink. It has certain practical significance.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  3. Study of the Multi-point Loading Electro-hydraulic Proportional Control System Based on PLC Simulation Control,TH137.5
  4. The Dynamic Analysis of Large Angle Belt Conveyor,TH222
  5. The Simulation Technology Study of Marine Gas Turbine Based on Modular Modeling,U674.703
  6. Modelling and Development of Simulation Software of Rolling Mill Bending Roller Control System,TG334.9
  7. Research of Vibration Mechanism on the 2030 Continuous Annealing Unit’s Temper Mill,TG333
  8. The Analysis of Motor Speed Control System and Control Strategy Study,TH137
  9. Dynamic Characteristic Simulation and Study of Sliding Coal Plow,TD421.62
  10. Large Belt Conveyor Dynamics Modeling and Software Development,TH222
  11. Mechanism Analysis of Vibrating Crack on the Mill’s Pipeline,TG333
  12. The master-slave control hydraulic excavator Research,TU621
  13. Research of Active Arc Suppression Coil Technology,TM475
  14. Analysis of Nonlinear Vibration of the Low Noise Vibratory Digging System with Multiple Movement Pair Clearances,TB533
  15. Application Research of Integrated Technology of Intelligent Fault Diagnosis to NC Machine Tool Fault Diagnosis,TH165.3
  16. Thermal Error Measurement and Modeling of High-speed Motorized Spindle,TG659
  17. Research and Application based on MATLAB / Simulink simulation model of high-pressure common-rail diesel engine,TK427
  18. Simulation Study of Lean Burn Gasoline Engine NOx Pollutants Reduction Using Lean NOx Trap,TK411.5
  19. The Modeling and Operation Optimization Strategy for the Pulverizing System of Medium Speed Mill Direct Firing,TM621.7
  20. Design and Research of Standard Metering Device of 60KA Heavy Direct Current,TM933.1
  21. A Thesis Submitted in Partial of Fulfillment of the Requirements for the Degree of Master of Engineering,TM921.51

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Boring and Boring > Boring and Milling Machine
© 2012 www.DissertationTopic.Net  Mobile