Dissertation > Excellent graduate degree dissertation topics show

Experimental and Numerical Simulation Study on the PCF Type Wet Desulfurization Dust Catcher

Author: ShiLin
Tutor: LiCaiTing
School: Hunan University
Course: Environmental Engineering
Keywords: PCF device numerical simulation reflector self-excitation channel
CLC: X701.3
Type: Master's thesis
Year: 2011
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


On the base of rebuilding the ordinary Granite water film dust collector, PCF wet desulfurization dust catcher was designed by Environmental Science and Technology college of Hunan University, which has a simpler structure, higher desulphurization and dust removal efficiency and gas processing capacity.In this paper, both the method of experimental and numerical simulation was used to research the PCF device. Software FLUENT6.3was used to simulate the gas flow and gas-liquid two-phase flow in the PCF wet desulfurization dust catcher to analysis the gas-liquid two-phase distribution characteristics of the device as well as the influence of the deflectors and the self-excitation channels. RNG κ-ε model was used to simulate the continuous, while Discrete Phase Model (DPM) was used for particle trajectories determination, SIMPLEC algorithm was selected for the velocity-coupled pressure. The profile of gas velocity、pressure drop、turbulence intensity and the concentration of liquid particles were analyzed, the flow field of PCF device with different structures were compared.The results show that the deflectors enhanced the turbulence of the flow, provide gas-liquid contacting area, extend the gas-liquid contacting path, and promote mass transfer reaction between gas and spraying liquids. The deflectors and the self-excitation channels are the main cause to the device pressure drop. The turbulence intensity was most intense around the deflectors and the self-excitation channel, which have structure that is more complex. On the base of self-excitation channel, the concentration of liquid droplet is highest. The direction of Flue gas in the inner tube was opposite to the outer ones. PCF’s sleeve structure can effectively reduce the water in the outlet flue gas, and then the mist eliminator can omitted, make the structure simpler. Furthermore, the simulation results are of major significance for the optimization design and practical tower operation. The trend of velocity and pressure in the device were same as the structure of the self-excitation was changed, while the value has some different.The simulation results were compared to experimental results, the profile of the outlet velocity when the ratio of liquid to gas was1L water/m3gas was compared to the data obtained by experiment. The pressure drop of the device under different inlet velocity was also compared to the experimental data. The results both show good agreement with the experimental ones, indicating that the simulation results are reliable.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Three-dimensional reconstruction and cochlear basement modal Numerical Simulation,R764
  21. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Exhaust gas processing and utilization > Desulfurization and desulfurization
© 2012 www.DissertationTopic.Net  Mobile